• Be EXTREMELY cautious if someone offers to buy your Bronco for more than your asking price and sight unseen. ESPECIALLY if the buyer is overseas. It's probably a scam.

    Discuss it more here:
    http://classicbroncos.com/forums/showthread.php?p=514932
  • The Classifieds forum is a place to buy and sell, not an open forum for people to give their opinions on Bronco values. Unless the seller specifically asks for help on pricing, please don't critique quality or asking price. If you're not interested then move on.

    Thanks!
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

KS 17" Dodge Wheels

jba6555

Full Member
Joined
Oct 29, 2007
Messages
193
City: Manhattan
Price: $ 100

I picked up a set of Dodge wheels I was going to use on one of my broncos but have changed my mind.
 

Attachments

  • PXL_20230624_162103146.jpg
    PXL_20230624_162103146.jpg
    296.2 KB · Views: 100
  • PXL_20230624_162100226.jpg
    PXL_20230624_162100226.jpg
    244.1 KB · Views: 85

godsotherson

Jr. Member
Joined
Nov 16, 2006
Messages
59
They fit fine after opening the center on a lathe or a dremel and a few minutes. Might want to use wheel spacers to deal with the backspacing.
 
OP
OP
J

jba6555

Full Member
Joined
Oct 29, 2007
Messages
193
They fit fine after opening the center on a lathe or a dremel and a few minutes. Might want to use wheel spacers to deal with the backspacing.

Oh... I thought I had read that backspacing on these worked fine for an EB. I know a few guys on here run them. I must have missed that.
 

1sicbronconut

Contributor
Bronco Guru
Joined
Dec 26, 2006
Messages
2,469
The work fine on an uncut Bronco, might look odd on a cut Bronco. I run these in both the 17" and 16" versions< I've used a die grinder to open them up but you're better off having them machined because most tire balance machines need the center hole to be true to center the tire/wheel on the balancer.
 

Attachments

  • 156673820_4163931313619889_4867735093158114024_o.jpg
    156673820_4163931313619889_4867735093158114024_o.jpg
    221.1 KB · Views: 137
Top