I don't follow how he could have with all the parts connected- 2,000psi at the mc, 1500 psi at the flex hose but only 500 or so psi at the bleeder.
1- Back to wondering how you can lose 1,000psi (2500 dropping to 1500psi) from the fitting on the mc thru hard line only?? Correct? Or was that 1,500 psi measurement thru some flex line??
2- How can you have 1500 psi at one end of a line and 500psi at the other end (2ft apart) when you still have liquid (brake fluid) coming out? Doesn't matter where the air is in the system there shouldn't be that kind of a drop after 3 minutes of holding your foot on the pedal. Pressure should equalize right? come on mechanical engineers...
Here's Chuzie's original 1st post:
"Trying to troubleshoot the T-Bird calipers on my 77. They SUCK, but why?
Running T-Bird up front, Explorer discs in back, 1-1/8 MC and WH Hydroboost.
2500 psi @ MC
1500 psi @ transition from hard line to caliper flex with one caliper disconnected. (note this it not at the tee above the diff but at the junction near the coil spring bucket.
500 psi @ caliper bleeder
Tried bleeding with caliper off knuckle and bleeder at 12 o'clock to ensure no air = still 500 psi
Soft line not kinked.
What are my potential culprits here? No much left but flex line, banjo and caliper.
Considered a partial blockage in the line, but that should eventually yield more than 500 psi with repeated pumps, no?"
We've got to eliminate something... flex lines are now "out" although after typing this your post popped up so the FRAME flex lines are still the old ones??? Hmmm, do you have a short metal line you can just loop de loop around to by-pass those rubber frame flex lines?
How about connecting the calipers as direct as possible to the mc ports? See if you can eliminate everything between the new calipers and the mc. Might be some funky fitting tho for the Tbird caliper.
Excuse me for possibly missing this earlier but how are we positive it's not the rear brakes?