• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Stock horn location

Dawg_enD

Full Member
Joined
Aug 9, 2003
Messages
331
Hi all,

My horn's not stock and I'd like to put it back in the stock location. Can anyone post some pics of the horn(s) in the stock location?

Thanks!
-Mike
 
OP
OP
D

Dawg_enD

Full Member
Joined
Aug 9, 2003
Messages
331
... hmm. This means my horns aren't stock, I guess, as I have two.

Are they mounted to the fender or the frame rail?
 

Skuzzlebutt

PhD, Dr. of Broncology
Joined
May 26, 2001
Messages
4,393
Loc.
Honeymoon Bay
To the top of the frame rail. There should be a threaded hole.
Then again, maybe they changed things when they added a relay to the horn wiring. Whenever that was, 74? Mines a '68.
 

JohnJohn

Contributor
Bronco Guru
Joined
May 6, 2005
Messages
2,179
Loc.
Richmond
I just pulled my horn off of a 77. I don’t know if you should have two or one but I only had one but I have had other cars (not Broncos) with a hi note and a low note horn.
Mine was mounted on the inside of the core support just above the frame where the body bolts to the frame. Mine was mounted with a nut and bolt.

There should be one bolt hole with a smaller hole next to it toward the outside of the body. The horn should have a small piece of metal sticking out of the mounting arm that goes in the small hole on the core support to align the horn and hold it in the correct spot. I think my horn was facing down.

Hope this helps.
 

Scoop

Contributor
Bronco Old Fart
Joined
Feb 1, 2006
Messages
11,121
Loc.
Cuchara, CO
Here's a pic of my stock 74 Ranger.
 

Attachments

  • DSC02934.JPG
    DSC02934.JPG
    152.3 KB · Views: 163
OP
OP
D

Dawg_enD

Full Member
Joined
Aug 9, 2003
Messages
331
That settles it, I'm definitely not stock. I should have known, SeaBiscuit told me so and he knows what he knows!

Guess I'm moving some horns this week.
 

76 bronco J

Bronco Guru
Joined
Oct 20, 2005
Messages
1,480
I just pulled my horn off of a 77. I don’t know if you should have two or one but I only had one but I have had other cars (not Broncos) with a hi note and a low note horn.
Mine was mounted on the inside of the core support just above the frame where the body bolts to the frame. Mine was mounted with a nut and bolt.

There should be one bolt hole with a smaller hole next to it toward the outside of the body. The horn should have a small piece of metal sticking out of the mounting arm that goes in the small hole on the core support to align the horn and hold it in the correct spot. I think my horn was facing down.

Hope this helps.

--,,,must depend on year >>>>>because my 76' horn was definetly on the core support from the factory like John John 's 77' with the bracket he describes having a little tab on it to keep it from spinning & pointed down while tightening,,,,no stock horn now ,but second pic shows the stock horn atleast for 76,,,, third pic shows the stock location for the 76 horn relay............EDIT,,, last pic.... noticed in scoops pic , the holes circled seem to be same ones used for atleast the 76-77's horn mounting location
 

Attachments

  • 000_0041.JPG
    000_0041.JPG
    113.5 KB · Views: 95
  • 000_0037.JPG
    000_0037.JPG
    92.6 KB · Views: 87
  • 000_0042.JPG
    000_0042.JPG
    74.9 KB · Views: 102
  • 000_0036.JPG
    000_0036.JPG
    83.2 KB · Views: 90
  • DSC02934.JPG
    DSC02934.JPG
    51 KB · Views: 106
Last edited:

Scoop

Contributor
Bronco Old Fart
Joined
Feb 1, 2006
Messages
11,121
Loc.
Cuchara, CO
--,,,must depend on year >>>>>because my 76' horn was definetly on the core support from the factory like John John 's 77' with the bracket he describes having a little tab on it to keep it from spinning & pointed down while tightening,,,,no stock horn now ,but second pic shows the stock horn atleast for 76,,,, third pic shows the stock location for the 76 horn relay............EDIT,,, last pic.... noticed in scoops pic , the holes circled seem to be same ones used for atleast the 76-77's horn mounting location

Now you've got me wondering if my horn was replaced! I looked at the holes closer and the bigger one does look like the paint is scratched like something had been mounted there at some time. I've had this Bronco since 1999 and it was originally bought by my wife's grandparents. So I am not 100% certain what was done to it before I got it.
 
Top