Community
Buy / Sell
James Duff Rust Bullet Sexton Offroad
Bronco Tech
Ford Bronco Parts - Classic Vintage Early Bronco Parts
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.
Apogee

Apogee

Contributor
Bronco Guru 16
Joined
Last seen
Messages
6,051

Latest activity Postings Images About

    • Apogee
      Apogee replied to the thread Dana 44 inner c cut and turn.
      FWIW, when I did my HPD44, I did cut the wedges off not only to narrow them to EB width, but also so that I could run whatever pinion...
    • Apogee
      Apogee replied to the thread Rock Auto discount code.
      RockAuto 5% Discount Code Expires July 26th, 2024: 270714836195642271
    • Apogee
      Apogee replied to the thread Disc brake conversion pad identification.
      GM FMSI D52 spec brake pads...you can take a rasp or file or whatever and chamfer the top of the pad so that you don't get that ridge of...
    • Apogee
      Apogee replied to the thread Lowest pressure for non beadlock Wheels.
      Without beadlocks, I always ran 10-12 PSI in my truck, trailer, etc, whatever was going out in the dunes. Anything higher and I tended...
    • Apogee
      Apogee replied to the thread Rock Auto discount code.
      RockAuto 5% Discount Code Expires July 19th, 2024: 269981998195642271
    • Apogee
      Apogee replied to the thread Choosing a differential gear ratio......
      The 10R80 has three overdrive gears, with the final OD ratio in 10th being 0.64:1, taller than even the 0.67:1 in the AOD, so gear...
    • Apogee
      Apogee replied to the thread Narrowed 78/79 Dana 44 castor.
      The caster on my '77 EB D44 and '76 F150 HP D44 were within 1° of one another, which I assume is probably just manufacturing tolerances...
    • Apogee
      Apogee replied to the thread Narrowed 78/79 Dana 44 castor.
      Sorry, I was thinking about the 1977 and earlier HP D44 housing stuff...the wedges are cast on the 78/79, but the outers are pressed and...
    • Apogee
      Apogee replied to the thread Rock Auto discount code.
      Sure, no problem. It's not the least I can do...but just about. RockAuto 5% Discount Code Expires July 12th, 2024: 268945250195642271
    • Apogee
      Apogee replied to the thread Narrowed 78/79 Dana 44 castor.
      If you're willing to go through the effort of narrowing an HP D44, then why not just rotate the knuckles at the same time to provide...
    • Apogee
      Apogee replied to the thread Stock Rear axle shock mounts are they strong enough?.
      You building a Formula Offroad rig? My factory mounts held up fine for decades, but I decided to go full-width F150 stuff, I used the...
    • Apogee
      Apogee replied to the thread Radius arms and alarms.
      They're all the same, more or less, between the EB, F150, and 78-79 Bronco applications, except the full-size applications used 7/16"...
    • Apogee
      Apogee replied to the thread Rock Auto discount code.
      RockAuto Discount Code Expires July 5th, 2024: 268274808195642271
    • Apogee
      Apogee replied to the thread Rock Auto discount code.
      RockAuto Discount Code Expires June 28th, 2024: 267447672195642271
    • Apogee
      Apogee replied to the thread Rock Auto discount code.
      RockAuto Discount Code Expires May 31st, 2024: 264423252195642271
    Show older items
  • Loading…
  • Loading…
  • Loading…
Top