• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Recent content by 74bronc

  1. 74bronc

    CA stock body mounts and hardware

    I have a set of brand new stock rubber body mounts that I'd like to unload. they were installed on my bronco for a few weeks, but when i installed, i took off a 1" body lift and didnt realize that the bronco would make an interesting noise with the body lower to the frame with an NP435...
  2. 74bronc

    CA Looking for C-4 Front Pump

    Thanks for the replies, guys. This is now OBE for me. The problem i had was i was on the tail end of a rebuild on this C-4 and was doing some oiling mods to make the transmission similar to a C-5 from an oiling perspective. There was a steel check ball lodged in it's passage in the pump stator...
  3. 74bronc

    CA Looking for C-4 Front Pump

    Anyone have a C-4 front pump laying around that you want to get rid of? Casting number on the one I have is D0AP-7A109-A Thanks
  4. 74bronc

    OH J type transfer case shifter and sun visors

    I am interested in a j shifter. Can you give me a total price with shipping to 92592? Thanks
  5. 74bronc

    1975 or 1976? CA Smog issues.

    I have actually done this before. When I moved from Utah to California, my 74 had a 351w in it. At that time, the rolling exemption hadn’t made it to 74 yet, so I had to smog......1 time. I took the Edelbrock manifold and 4bbl carb off and put a stock manifold and 2bbl carb on with egr. No air...
  6. 74bronc

    CA C-4 torque converter

    Looking for bronco c-4 torque converter. Will take in any condition.
  7. 74bronc

    CA 302 block and heads

    check your PM. I am interested.
  8. 74bronc

    LA Holley 470 Truck Avenger

    I’ll take it.. private message sent. Thanks
  9. 74bronc

    CA Aluminum radiator

    Pm sent about the radiator
  10. 74bronc

    5.0L EFI throttle body cooling lines

    yep, that's it. thanks for the pic. it helped me identify the piece that's missing on my bronco engine. I think i am just going to plug off the coolant line that is currently hooked up from the lower intake to the back side of the throttle body spacer and call it good. Thanks guys for the help.
  11. 74bronc

    5.0L EFI throttle body cooling lines

    my 75 Bronco has ford 5.0EFI on it, installed by the previous owner. there's alot of things about this thing that are jerry rigged and i am trying to work them out one by one. The rear throttle body coolant line is connected from a nipple on the lower intake to the rear facing nipple on the...
  12. 74bronc

    TN Auto steering column

    Interested in this if you still have it...sent you a pm
  13. 74bronc

    Synthetic Lubricants

    Tech article by Todd Henderson (74bronc) If you're like me, the idea of religious 3,000 mile oil changes has been crammed into your being ever since you began learning about cars. This philosophy is undoubtedly a result of decades of 3,000 mile oil/filter changes and the "Quick Change" oil...
  14. 74bronc

    Bronco Driver Magazine - Backissues

    this is a shameless plug for my ebay auctions for some back issues of Bronco Driver that I need to clean out of the garage. If you missed some issues, this is your chance to pick them up for cheap. I only have selected issues and I DO NOT have any of the early issues. Those are hard to come...
  15. 74bronc

    Any problems running a 351w w/ a C4?

    I ran that combo for about 6 years. Worked great. No problems. The balance on the early 302's and 351w is the same, so you can use your stock flex plate, EB torque converter etc. and you are good to go.
Top