Recent content by rfh11

EBay Scams I really don't have a problem with what anyone lists their Bronco for on ebay or any publication. It is up to the buyer to determine what the value should be. My concern is what e-bay has become. I believe and hope that honest people still use the site. I got a second chance offer on...

The seam is at the cross member on the flat portion of the floor and then angles up toward the firewall. I can't locate a seam at the firewall. Was there one there. Or do you weld to what is left of the toe panel? Something I would like to pass along. I used a pickle fork to break the spot welds...

Floor Pans One last question,I hope. Does the original toe board have a seam somewhere? The replacement panel isn't as tall as the original. These are Carpenter panels. Also, the bushing placed was beside the body support bushing,not bolted in just pushed in. The bronco has a lift not sure how...

It appears on the old floor pan that the edge at the door was under the threshold lip,is that correct. But the support appears to be flush with the top edge of the rocker panel. One other thing is the bronco appears to have a lot of stress cracks or metal fatigue. I am guessing that this is from...

floor pans Thanks for the replies. I believe that it is the aux tank support. The only other thing is why was the floor support in two pieces? Thanks again. Randy

CEO Salary Can you honestly say that the CEO of a billion dollar company warrants a million dollar income just because he is the CEO. You can't believe that he is involved in the day to day operation of the company and has the answers to make the company profitable. Oh,yes I forgot lay off...

I am replacing the floor pans in a 1976. I searched the tech articles and they were helpful. My question is the brace the supports the floor pan across the bronco has a support coming off the rail on the drivers side that protrudes into the bronco about 8 inches. The pictures I looked at didn't...

door skins I have to agree with all of what Andy stated. The only advantage I have is the body shop that is doing the work is where my son in law works. I know that doesn't mean much as far as the quality of work they perform. I am counting on the living hell my son in law would have to go...

door skins Thanks for the reply. You have to admit your limitations. I will have the skin installed by a body shop. Thanks, Rfh11

Just purchased drivers side door skin from Dennis Carpenter. Appears to be very good at this point. Any tricks to installing? Did a search on previous threads but wasn't what I was looking for. Any help would be appreciated. I can have it installed for $75.00. Seems fair? But thought I might...

photo you are right about the ignition module. That was one of the few things that was where it was suppose to be. Thanks for all the help. Randy

Engine photos Thanks for the pictures. That helps out a lot. Thanks again, randy

I need photos of the engine compartment for a 76 with power brakes and power steering. Stock engine bay would be best. Some of the electrical has been moved and I would like to put it back where it belongs. Coil was moved to A/C mounting plate but no A/C. I am trying to finish up the engine bay...

Will the mustang (Early) exterior door handles fit the early Bronco. What year Mustang handles would fit a 76 Bronco? Thanks, Randy

I am trying to remove a power steering gear box from a 72 Eb. I have all the bolts loose that mount to the frame except the lower left. It will not move. All of the bolts are removeable? I want to make sure before I start beating on it or heating it. Thanks for your help. rfh11