• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Need engine compartment photo's

rfh11

New Member
Joined
Oct 16, 2005
Messages
34
Loc.
Charlotte
I need photos of the engine compartment for a 76 with power brakes and power steering. Stock engine bay would be best. Some of the electrical has been moved and I would like to put it back where it belongs. Coil was moved to A/C mounting plate but no A/C. I am trying to finish up the engine bay and close the hood and move on.


Thanks
Randy
 

OUR75

Jr. Member
Joined
Aug 21, 2003
Messages
140
Loc.
Sparks, Nv.
These are of a 77

I had these pics already on my computer. If there is a more specific shot you need let me know.
 

Attachments

  • Copy of new photos 255.jpg
    Copy of new photos 255.jpg
    183.7 KB · Views: 169
  • Copy of new photos 257.jpg
    Copy of new photos 257.jpg
    170.2 KB · Views: 156

horseman

Full Member
Joined
Sep 19, 2004
Messages
272
Im doing the same thing so if you could help me also I need to know what
the single wire (orange) the comes from the same bundel that comes from the back of the intake and connects two plugs to the ignition module its a female connection. I didnt take it apart and I cant find what it could conect to ? Thanks
 

mitzel

Sr. Member
Joined
Feb 18, 2004
Messages
562
Loc.
Googleplex
comparing with the pictures posted one thing I see different from the
two '76 bronco I have is the ignition module placement. on both of mine
the module is mounted on top of the left inner fender. while in the picture
it's shown mounted to the left side of the firewall.
 

72_EB

Contributor
66to77
Joined
Feb 4, 2003
Messages
4,982
Just disassembled a '76 too. My module was on top of the driver's side fender too not the firewall.
 
OP
OP
R

rfh11

New Member
Joined
Oct 16, 2005
Messages
34
Loc.
Charlotte
photo

you are right about the ignition module. That was one of the few things that was where it was suppose to be. Thanks for all the help.


Randy
 

72_EB

Contributor
66to77
Joined
Feb 4, 2003
Messages
4,982
No pic, but all of mine have always been on the front of the passenger wheel tub. Last '76 the voltage regulator (aftermarket) was to the left of the starter solenoid. VR is usually on the inner fender well though (stock I think), but I've seen them on the top of the passenger wheel tub too (just make sure it is grounded well).

Green manalishi said:
Hey I hate to hijack, but do you have a pick of the passenger side? Need to see the Starter solenoid.

Thanks...
 

DonsBolt

Bronco Guru
Joined
May 5, 2005
Messages
5,249
Loc.
Chestnut Hill, Mass
Green manalishi said:
Hey I hate to hijack, but do you have a pick of the passenger side? Need to see the Starter solenoid.

Thanks...

this is the best pic I have of the Solrnoid
 

Attachments

  • fenders2.JPG
    fenders2.JPG
    67 KB · Views: 104

69marquisragtop

Full Member
Joined
Jun 18, 2004
Messages
182
Loc.
Roanoke, VA
For what it's worth, here's a couple shots of a stock '76 engine bay, left and right. The module is on the left fenderwell. VR is on the front part of the right fenderwell.
 

Attachments

  • sm2005_0114(019).JPG
    sm2005_0114(019).JPG
    94.4 KB · Views: 88
  • sm2005_0226(001).JPG
    sm2005_0226(001).JPG
    74.2 KB · Views: 106
  • sm2005_0226(004).JPG
    sm2005_0226(004).JPG
    71.1 KB · Views: 120

MarsChariot

Contributor
Planetary Offroader
Joined
Oct 12, 2004
Messages
2,605
Loc.
Albuquerque, New Mexico
DonsBolt said:
this is the best pic I have of the Solrnoid


DonsBolt,
Your solenoid is crooked. What is that on your Pass inner fender? And what is the heater valve doing out there in Timbuktoo?

Sorry, couldn't resist!
 

DonsBolt

Bronco Guru
Joined
May 5, 2005
Messages
5,249
Loc.
Chestnut Hill, Mass
MarsChariot said:
DonsBolt,
Your solenoid is crooked. What is that on your Pass inner fender? And what is the heater valve doing out there in Timbuktoo?

Sorry, couldn't resist!

Well thats the way it came when I bought it, as for the heater valve thats fixed now.

The Things on the fender are relays and circuit brakers for off road lights.

Here is how the motor looks now
 

Attachments

  • motor2.JPG
    motor2.JPG
    126.6 KB · Views: 95
Top