Hey All-
I have a customer in Oregon who has installed my inserts and is using a RAMPAGE soft top. The front, bottom, corner of the top (if that makes any sense), extends into the door opening to seal against the lower rear part of the window frame.
He's asking how to secure the bottom leg of the door seal frame without drilling into the insert.
I met a customer at MEBR this year who took me over to show me how he had solved the problem with an extension piece which looked good and worked well. Unfortunately, I didn't get pictures to share with others.
If you're out there or you've dealt with it, can you post some pics.
Heres a picture I just stole of the offending rod from John Johns Rampage thread-
Thanks, Mike
I have a customer in Oregon who has installed my inserts and is using a RAMPAGE soft top. The front, bottom, corner of the top (if that makes any sense), extends into the door opening to seal against the lower rear part of the window frame.
He's asking how to secure the bottom leg of the door seal frame without drilling into the insert.
I met a customer at MEBR this year who took me over to show me how he had solved the problem with an extension piece which looked good and worked well. Unfortunately, I didn't get pictures to share with others.
If you're out there or you've dealt with it, can you post some pics.
Heres a picture I just stole of the offending rod from John Johns Rampage thread-
Thanks, Mike
Attachments
Last edited:











