• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Replacement panels... welded vs glued?

Gas Pig

Bronco Guru
Joined
Oct 19, 2005
Messages
2,778
Hey anyone have experience with using panel bond on Bronco replacement panels? I have always welded mine in (floors or rockers) but this is my first time replacing rear quarters. Looking at things I thought panel bonding the rear quarters. My thought is by using panel bond it would be an excellent way to prevent rust between the seems. Since I have never glued any panels before I'm not what the process is and/or pitfalls might entail?

Thanks Jeff
 

1970 Palmer

Sr. Member
Joined
Mar 2, 2020
Messages
454
I welded my panels and it went well.

I did use the 3M panel bond to seal the roof drip rail after it was cleaned. It wiped on with a finger for shape, and sanded nicely after it hardened.

I used the panel bond to seal the seams in the upper and lower rear quarter panels, and also the seam for the tail light housing to the quarter panels. The seams were lightly sealed "like O.E.", not filled.

This was my first time with panel bond. It's lots cheaper from Amazon, but the mixing gun is pricy.

John
 

Beer and Fish

Contributor
Bronco Guru
Joined
Jan 2, 2013
Messages
1,513
Yes! There is a better 3M product called structural impact adhesive that I would recommend over panel bond for the rear quarters. The stuff is amazing and STRONG!
 

Beer and Fish

Contributor
Bronco Guru
Joined
Jan 2, 2013
Messages
1,513
JB Weld and JB Quick suck! You get what you pay for and I've found it for $100
 

Timmy390

Contributor
Bronco Guru
Joined
Jan 1, 2011
Messages
5,948
Loc.
Conway, AR
I've never used glue to attach any panels

How in the world would you ever get it off should there be a need?

What is the working time of the glue/bond?

I'm looking to do rear Q's and not looking forward to the welding of 100 spots per side.

Tim
 

wsager

Full Member
Joined
Dec 3, 2014
Messages
334
I've never used glue to attach any panels

How in the world would you ever get it off should there be a need?

What is the working time of the glue/bond?

I'm looking to do rear Q's and not looking forward to the welding of 100 spots per side.

Tim

Heat will help release the factory stuff.
 

DC_Gearhead

Sr. Member
Joined
Dec 28, 2015
Messages
660
I used it lots of times. Mainly on my door skins and rear quarters.


Sent from my iPhone using Tapatalk
 

JWMcCrary

Contributor
Bronco Guru
Joined
Oct 14, 2004
Messages
5,001
I used it on my dash overlay, to plug the holes left by the gas fillers, and to patch some breaks in the front fenders. It might break but I don't think there is any way you could pull it apart if applied properly. Downside is that it's expensive. The applicator if I remember correctly was almost $100 and then you need the panel bond. You can buy a pack of nozzles as well, which you will need when using the same tube more than once.

When I did the rock sliders out of 2x6 I welded 3 of the caps on the ends and did the 4th one with panel bond as test, curious if it holds up. If it doesn't I'll weld it back on.
 

Attachments

  • IMG_3449.jpg
    IMG_3449.jpg
    115 KB · Views: 170
  • IMG_3451.jpg
    IMG_3451.jpg
    107.6 KB · Views: 182
  • IMG_3853.jpg
    IMG_3853.jpg
    127.9 KB · Views: 197
  • IMG_4047.jpg
    IMG_4047.jpg
    145.8 KB · Views: 220

okie4570

Contributor
Bronco Guru
Joined
Jul 16, 2012
Messages
9,537
Loc.
NW OK
I'll be panel bonding if I ever get around to replacing my rear quarters.
 

Rustytruck

Bronco Guru
Joined
Feb 24, 2002
Messages
10,872
Just remember the car companies use panel adhesives on joints designed for using adhesives. proper prep is everything. read and follow instructions. almost all adhesives fall apart at 400 degrees so it isnt really hard to remove it unless you glue plastic to plastic.
 

JWMcCrary

Contributor
Bronco Guru
Joined
Oct 14, 2004
Messages
5,001
Just remember the car companies use panel adhesives on joints designed for using adhesives. proper prep is everything. read and follow instructions. almost all adhesives fall apart at 400 degrees so it isnt really hard to remove it unless you glue plastic to plastic.

the 3M stuff I used could be heated to speed up curing and says is 2x+ stronger than a weld for putting 2 panels together. It has to overlap and is intended for sheet metal. Only way I could get any off was to sand it off. Dead on on proper prep, that's the key. I did a test on 2 pieces of sheet metal and couldn't tear them apart. The stuff I used can be spot welded thru if that is something somebody wanted to do. Or at last that's what I was told.
 

Steve83

Bronco Guru
Joined
Jul 16, 2003
Messages
9,360
Loc.
Memphis, TN, USA, Earth, Milky Way
Top