• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Stock gas tank and vents, do I need vapor/fuel overflow?

th3fourn

Contributor
Not a mechanic trying to be
Joined
Apr 18, 2021
Messages
74
Hey guys,

I have a 74 bronco with Main and Aux tank, I was wondering about the 2 small outlets at the top of the tank. Do I have to have a vapor/fuel overflow? Can I just plug these?

Secondly can I use one of these for the return line for a EFI system? Any info would be appreciated

Thanks!
 

Attachments

  • ft29_1.1141.jpg
    ft29_1.1141.jpg
    60.4 KB · Views: 148

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
Yes you can use one for a return line. But yes you should keep, or reinstall the vent system.
Is all that stuff gone? No charcoal canister on the passenger side frame up front? No condensing tank behind the driver’s left shoulder?
If not you are better off updating it to the’76 and newer style.

You can cap it off if you want, but it doesn’t often work out well. You have the wrong style gas cap too. With no EVAP system the cap needs to vent outward as well as inward.
 
OP
OP
T

th3fourn

Contributor
Not a mechanic trying to be
Joined
Apr 18, 2021
Messages
74
Thanks for the help, so what would be the best way to set up? I have the old canister but the lines were cut. What does the charcoal canister do? Can I use that and not a vent system? Just not sure what the charcoal canister does
 
OP
OP
T

th3fourn

Contributor
Not a mechanic trying to be
Joined
Apr 18, 2021
Messages
74
Also what’s your opinion for the best / easiest way to do this
 
OP
OP
T

th3fourn

Contributor
Not a mechanic trying to be
Joined
Apr 18, 2021
Messages
74
Yes you can use one for a return line. But yes you should keep, or reinstall the vent system.
Is all that stuff gone? No charcoal canister on the passenger side frame up front? No condensing tank behind the driver’s left shoulder?
If not you are better off updating it to the’76 and newer style.

You can cap it off if you want, but it doesn’t often work out well. You have the wrong style gas cap too. With no EVAP system the cap needs to vent outward as well as inward.
So if I get a new gas cap that vents should that be fine?
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
The charcoal canister "absorbs" (holds in suspension actually I guess) the vapors that naturally vent out of the tank over time. When the engine is running these captive hydrocarbons are sucked from the canister into the engine and burned along with the fuel. Basically works unnoticed.
But what is noticed is the reduction in overall gas smell around the vehicle. Especially if it's parked in the garage and you have a spouse that's not impressed with fuel smell in the house.

The early style included a high-mounted condensing tank so that excess vapors that actually could re-form into liquid form were re-introduced into the main gas tank through the second port you see on yours. One was the "vent" and one was the return. This orientation was also handy for a utility vehicle like a Bronco that might spend some time standing on it's head coming off of a small cliff into a ditch, or parked on the side of a hill for an extended period.
Any vapors left over went up front to the low mounted charcoal canister.

For the '77 model year all vehicles were no longer allowed to have fuel system components of any kind inside the vehicle. Hence the pickup trucks getting rid of their behind the seat gas tanks mid-year '77 and for the '76 model year Ford got rid of the condensing tank in the Bronco and mounted a new design charcoal canister up on the firewall in a higher location. Pickups got the new design too, but mounted lower on the frame rail because even as work vehicles they were not expected to be doing any contortions at high angles or bouncing around off road quite as much as the Bronco.
And besides, Broncos didn't have any room under the hood as it was, so the firewall seemed like a good spot!

Our older carbureted vehicles vented the charcoal canister into the air cleaner housing where it was gently sucked from the canister into the intake while the engine was running. Later computer controls allowed for more direct injection so they connected it to manifold vacuum but with a computer controlled solenoid valve so it wasn't sucking all the time.

Your best bet is to source one of the updated styles of canister that can still be bought brand new and mount it on the firewall. Then connect your two vents via a T-fitting to the small port on the canister. Cap off the unused port on the main tank, or use it as your return line as you were thinking.
If your carburetor is still the original type with a bowl vent on the top, you run a hose from that port over to the medium size port on the canister.
Of the two large ports, one is left open to outside air but covered by a "mushroom cap" to keep debris out and also to limit output in case excess vapors collect there. The second one gets a hose to the air cleaner housing so that the engine can suck in the vapors and you don't have to smell them.

Your filler neck and cap are already of the later style so they are good to go. Only those with early '70 and older Broncos (pre EVAP) need to update their filler necks and caps.

Paul
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
So if I get a new gas cap that vents should that be fine?
Not that simple unless you just want to drill a hole in your old cap.
The older caps won't fit into the newer filler necks for just this reason. They did not want people just spending three bucks for a new cap and defeating the whole purpose of the EVAP system.
The caps have different length tangs on them so an early won't fit a late vehicle and vice versa.

paul
 
OP
OP
T

th3fourn

Contributor
Not a mechanic trying to be
Joined
Apr 18, 2021
Messages
74
The charcoal canister "absorbs" (holds in suspension actually I guess) the vapors that naturally vent out of the tank over time. When the engine is running these captive hydrocarbons are sucked from the canister into the engine and burned along with the fuel. Basically works unnoticed.
But what is noticed is the reduction in overall gas smell around the vehicle. Especially if it's parked in the garage and you have a spouse that's not impressed with fuel smell in the house.

The early style included a high-mounted condensing tank so that excess vapors that actually could re-form into liquid form were re-introduced into the main gas tank through the second port you see on yours. One was the "vent" and one was the return. This orientation was also handy for a utility vehicle like a Bronco that might spend some time standing on it's head coming off of a small cliff into a ditch, or parked on the side of a hill for an extended period.
Any vapors left over went up front to the low mounted charcoal canister.

For the '77 model year all vehicles were no longer allowed to have fuel system components of any kind inside the vehicle. Hence the pickup trucks getting rid of their behind the seat gas tanks mid-year '77 and for the '76 model year Ford got rid of the condensing tank in the Bronco and mounted a new design charcoal canister up on the firewall in a higher location. Pickups got the new design too, but mounted lower on the frame rail because even as work vehicles they were not expected to be doing any contortions at high angles or bouncing around off road quite as much as the Bronco.
And besides, Broncos didn't have any room under the hood as it was, so the firewall seemed like a good spot!

Our older carbureted vehicles vented the charcoal canister into the air cleaner housing where it was gently sucked from the canister into the intake while the engine was running. Later computer controls allowed for more direct injection so they connected it to manifold vacuum but with a computer controlled solenoid valve so it wasn't sucking all the time.

Your best bet is to source one of the updated styles of canister that can still be bought brand new and mount it on the firewall. Then connect your two vents via a T-fitting to the small port on the canister. Cap off the unused port on the main tank, or use it as your return line as you were thinking.
If your carburetor is still the original type with a bowl vent on the top, you run a hose from that port over to the medium size port on the canister.
Of the two large ports, one is left open to outside air but covered by a "mushroom cap" to keep debris out and also to limit output in case excess vapors collect there. The second one gets a hose to the air cleaner housing so that the engine can suck in the vapors and you don't have to smell them.

Your filler neck and cap are already of the later style so they are good to go. Only those with early '70 and older Broncos (pre EVAP) need to update their filler necks and caps.

Paul
Got it thanks for your time, I’m just wondering because when I bought the car and tire it apart there was no charcoal canister.

That being said do I have to run a line from my main tank and aux tank to the charcoal canister all the way from the back? Just worried about a lot of lines running from both the tanks.

I still have my vapor canister and I cut the lines so I should be able to attach lines back to the two outlets and and then drill in the stock tank for the return.

Can I get away with just using the old canister?
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
I’m just wondering because when I bought the car and tire it apart there was no charcoal canister.
Yep, common thing to find missing. Some got rid of it because it was just more of that "smog crap" they could not stand, or their dad told them was slowing things down and robbing power.
Or because it was just more tubes and someone wanted to clean things up.

That being said do I have to run a line from my main tank and aux tank to the charcoal canister all the way from the back? Just worried about a lot of lines running from both the tanks.
Yes, that's how they all were. You could mount the charcoal canister somewhere in the back I suppose, such as up in the wheel well. That would shorten the tubing needed.
But it's not that much and it's almost never in the way of what you're working on if it's mapped out properly. You don't need two going all the way either. Just two Teed into one.
The original ran across the back of the frame crossmember to the passenger side and then up front to the canister. Pretty much out of the way.

I still have my vapor canister and I cut the lines so I should be able to attach lines back to the two outlets and and then drill in the stock tank for the return.
Can I get away with just using the old canister?
Two different words. What do you have left? The metal Charcoal Canister that was mounted to the frame, or the translucent plastic tank behind the driver's seat?
If the tank behind the seat I suppose you could use it as the entire venting system. Never seen anyone do that, but in theory it should be better than either capping off the ports in the tanks or leaving them open. Some just run a tube up and curl it around up high.
Might be worth a try.
 
OP
OP
T

th3fourn

Contributor
Not a mechanic trying to be
Joined
Apr 18, 2021
Messages
74
I have
Yep, common thing to find missing. Some got rid of it because it was just more of that "smog crap" they could not stand, or their dad told them was slowing things down and robbing power.
Or because it was just more tubes and someone wanted to clean things up.


Yes, that's how they all were. You could mount the charcoal canister somewhere in the back I suppose, such as up in the wheel well. That would shorten the tubing needed.
But it's not that much and it's almost never in the way of what you're working on if it's mapped out properly. You don't need two going all the way either. Just two Teed into one.
The original ran across the back of the frame crossmember to the passenger side and then up front to the canister. Pretty much out of the way.


Two different words. What do you have left? The metal Charcoal Canister that was mounted to the frame, or the translucent plastic tank behind the driver's seat?
If the tank behind the seat I suppose you could use it as the entire venting system. Never seen anyone do that, but in theory it should be better than either capping off the ports in the tanks or leaving them open. Some just run a tube up and curl it around up high.
Might be worth a try.
the clear plastic tank
So you’re saying I’d I run one tube up through the floor from each tank and curl it a few times?
 
OP
OP
T

th3fourn

Contributor
Not a mechanic trying to be
Joined
Apr 18, 2021
Messages
74
Yep, common thing to find missing. Some got rid of it because it was just more of that "smog crap" they could not stand, or their dad told them was slowing things down and robbing power.
Or because it was just more tubes and someone wanted to clean things up.


Yes, that's how they all were. You could mount the charcoal canister somewhere in the back I suppose, such as up in the wheel well. That would shorten the tubing needed.
But it's not that much and it's almost never in the way of what you're working on if it's mapped out properly. You don't need two going all the way either. Just two Teed into one.
The original ran across the back of the frame crossmember to the passenger side and then up front to the canister. Pretty much out of the way.


Two different words. What do you have left? The metal Charcoal Canister that was mounted to the frame, or the translucent plastic tank behind the driver's seat?
If the tank behind the seat I suppose you could use it as the entire venting system. Never seen anyone do that, but in theory it should be better than either capping off the ports in the tanks or leaving them open. Some just run a tube up and curl it around up high.
Might be worth a try.
And sorry for the questions but the lines I’d run from the ranks to the charcoal canister would I use the small outlets on the top of the tank or where would I attach them?
 

armynavy17

Contributor
Sr. Member
Joined
Jan 9, 2010
Messages
361
Even though is seems easier to just reuse that plastic tank, it's not a good idea without a charcoal canister. The charcoal canister is what actually traps the fuel vapors until you start the engine and they get burned. The condensate tank you have only separates liquid fuel from the vapors. Without a charcoal canister, there's nowhere for the vapors to go so they just end up stinking up the garage again. The condensate tanks are also known for cracking at the seams which then vents the fuel vapors directly into the cab.

Take the time and do it right the first time. It'd be a shame for you to have taken the truck all apart just to put it back together half way right.

Like DirtDonk said, the best way to do it is to upgrade to the later '76+ style. Connect the main tank with a piece of rubber fuel hose to a hard line that runs along the drives side about to the rear crossmember in the bed. Tee in the aux tank with more rubber fuel hose then install a roll over valve from a DeLorean (not strictly necessary but generally accepted as the "right" way to do it)and run another hard line over to the passenger side along the rear crossmember. Use yet another piece of rubber fuel hose to jump up to a hard line that runs up the passenger frame rail to the engine bay. Mount a new charcoal canister high on the firewall and connect everything up.

I'll try and snag some pics later today, it sounds like a lot but it really can look clean and is the best way to do it.

https://store.delorean.com/101402-rollover-valve.html
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
And sorry for the questions but the lines I’d run from the ranks to the charcoal canister would I use the small outlets on the top of the tank or where would I attach them?
Yes, naturally. As discussed those are in fact the charcoal canister vent lines.
If you do it like suggested you'll have one extra port on the tank you can use as your EFI return line so you don't have to drill a new one.
Easy peasy.

So you’re saying I’d I run one tube up through the floor from each tank and curl it a few times?
No, never...
If you're creating new, don't bother putting it into the cab or you'll just be polluting yourself and your family out of the truck on a regular basis. Go from a cold morning to a hot afternoon? Fumes in the cabin. Park the vehicle on a hill facing up, down or sideways while out on the trail? Fill the tank too high? Fumes in the cabin. Leak in a hose? Again, fumes in the cabin.
If you're going to go the short and quick route, you would run a hose up into the wheel well and loop it a time or three. Maybe even put a valve or filter on the top end. The longer the hose, the less likely it is for liquid gas to leak out. Fumes on the other hand can still get out, though not as much. If they do though... Fumes in the cabin.

What armynavy said.

Paul
 

armynavy17

Contributor
Sr. Member
Joined
Jan 9, 2010
Messages
361
Not the greatest pictures, but should give you the idea.
 

Attachments

  • IMG_20220323_151905122.jpg
    IMG_20220323_151905122.jpg
    122.1 KB · Views: 210
  • IMG_20220323_151953160.jpg
    IMG_20220323_151953160.jpg
    116.8 KB · Views: 192
  • IMG_20220323_152027791.jpg
    IMG_20220323_152027791.jpg
    99.1 KB · Views: 190
  • IMG_20220323_152109212.jpg
    IMG_20220323_152109212.jpg
    129.1 KB · Views: 194
  • IMG_20220323_152838929.jpg
    IMG_20220323_152838929.jpg
    168 KB · Views: 233

The Far Side

Jr. Member
Joined
Sep 21, 2018
Messages
113
Paul……my canister is long gone. Just the bracket left. The condensing tank is there and I had planned to reuse. Where do you find the later model version of the charcoal canister that you mentioned could be firewall mounted?
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
In the junkyard most any mid 70s or later Ford product. Up to probably about 94 or 95 maybe.
Brand-new you just ask for a 77 bronco canister. if they don’t list it then maybe I’ll late 70s early 80s mustang. The pick up trucks use a similar shape, but I think it’s a little larger. Maybe because of the higher capacity tanks?

Summit and jags carry them as well as Amazon, AutoZone, O’Reilly‘s, and probably everywhere else.
Look for one with the little screw tab coming out of the top and that can be used to screw it to the pinch weld area of the firewall.

I think the mushroom caps have proven hard to find over the years, but the sources must be getting more plentiful by now I would think.
 
OP
OP
T

th3fourn

Contributor
Not a mechanic trying to be
Joined
Apr 18, 2021
Messages
74
Maybe a dumb question but any clue on where I can get those mushroom caps, do t know what to search for or where I would find them. Any help would be appreciated.
I am going to go all out and set it up right, found the old reservoir and buying a new canister.

From what I see the new can isters don’t come with the caps…. Right?
 

DirtDonk

Contributor
Bronco Guru
Joined
Nov 3, 2003
Messages
51,651
Looks perfect. I’m still surprised that nobody seems to link the caps with the canisters. It’s pretty much universal that you need at least one.

A few members here have found them though, so hang in there and someone should have an answer.
Of course there is still the junkyard. But it should not be the only source.
 

tirewater

Bronco Guru
Joined
Jan 28, 2011
Messages
1,046
Loc.
San Francisco Bay Area
The caps are essentially dust covers. They allow fresh air to enter the canister, so don't put plugs on the holes if you don't have the caps.

The cap part #:
D1AZ-9E602-B
 
Top