Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
If you have problems registering or can't log into your account, please contact Admin.
Off frame rebuild all new springs, shocks and bushings. Set 1” higher on right side than left. Checked coil springs on left side from spring bucket to top of spring 13” on left side 12”. Anyone had problem or ideas. Thanks Joe
Is the vehicles fully assembled and driving?
Or is it still in pieces?
You can’t tell anything until it’s fully assembled. And even if it’s fully assembled, but the front is off center due to the lift, and not using a track bar drop or riser, that can make the difference as well.
Heck, our 76 sits 1 inch higher on the driver's side. I have been around long enough to know the drill. C-bushing re-seating, new springs, etc. Nothing fixes it. Pretty much gave up.
Heck, our 76 sits 1 inch higher on the driver's side. I have been around long enough to know the drill. C-bushing re-seating, new springs, etc. Nothing fixes it. Pretty much gave up.
Well pulled the front end redid the C bushings as outlined from Duffy and it’s an 1/8” higher on the left side. My weight will level it out. Lol. Thanks for all the input. Joe