• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Vin # Locations besides doors & glove box

Broncitis

Sponsor/Vendor
MEB Founder
Joined
May 18, 2004
Messages
5,283
http://www.martiauto.com/

It is just behind the motor mount in most of the ones I recall seeing. I'm not 100% sure that 68 and earlier have it there, but I have no reson not to look there first. It's not easily accesable, but it's not impossible as some have described other areas as being.

I'll try to find the pics of our 77 tonight for a better reference.
 
OP
OP
E

EdgeCrusher

New Member
Joined
Jun 2, 2004
Messages
5
Loc.
Merced, Ca
Well, I ordered a vin plate from Marti Auto, so I'm not too worried about it anymore. Thanks for the help guys!

Steve
 

Madgyver

Bronco Madman
Joined
Jul 30, 2001
Messages
15,030
On my 77, It's here in the circle......................
 

Attachments

  • im001543a.jpg
    im001543a.jpg
    69.3 KB · Views: 189

Broncitis

Sponsor/Vendor
MEB Founder
Joined
May 18, 2004
Messages
5,283
VIN on our 77 Ranger and where I have found others: Top of passenger frame rail between axle and firewall (below verticle on firewall next to bellhousing on this one)
 

Attachments

  • mvc-055f.jpg
    mvc-055f.jpg
    76.1 KB · Views: 182

SeaBiscuit68

Bronco Guru
Joined
May 26, 2003
Messages
1,404
Loc.
Tacoma Wa
Broncitis said:
That's not an OEM VIN plate, they never looked like that.

I'll find a link to one.....

Well I wasn't going to disagree with you without being certain but now I can. I just rode in another 68 with the same tag behind the windshield. His, like mine, has original body paint on it (back side), Ford logo etc. The owner claims to know a 66 with this tag also.
 

SaddleUp

Bronco Guru
Joined
May 23, 2004
Messages
9,655
Loc.
Vancouver, WA
Broncitis said:
VIN on our 77 Ranger and where I have found others: Top of passenger frame rail between axle and firewall (below verticle on firewall next to bellhousing on this one)
Thank You, After about 5 minutes with a wire brush I was able to find and verify mine (1969) about an inch further back than this one. Without the body lift I doubt I could have found it though. (Let alone read it)
 

Broncitis

Sponsor/Vendor
MEB Founder
Joined
May 18, 2004
Messages
5,283
SeaBiscuit68 said:
Well I wasn't going to disagree with you without being certain but now I can. I just rode in another 68 with the same tag behind the windshield. His, like mine, has original body paint on it (back side), Ford logo etc. The owner claims to know a 66 with this tag also.

Maybe, but I would not call that certain. I have looked at literally over a hundred+ EB VINs, and they all have followed the same exact style as issustrated on the website I linked. This same style is also illustrated in the front of every Ford Service Manual set for vehicle identification.

My guess is someone in your area was doing something with those? Perhaps rebuilding salvage vehicles or who knows what, but I'd bet $100 those never came out of the Michigan Truck Plant, and that they were not originally on the dash behind the windshield.
 
Top