• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Dash

deltarat

Bronco Guru
Joined
Jul 12, 2006
Messages
3,371
Loc.
Drew,Ms
When I do my rewire I was thinking of cutting out the center of the dash from the steering column to the glove box leaving an inch or so all the way around and overlaying with something like ABS or some other material, not diamond plate-too uneven- or stainless-too bright in the sun and too hard to work with.

I was going to use a piano hinge at the bottom and stainless pan head screws to hold the top. then I could swing it out to do my wiring and other things behind the dash, instead of standing on my head to do it.

Also if my dash changes, as air and heat controls and air vents, I just replace the overlay.

Has anyone done this?

What material and where did you get it?

I would love to see some pictures if you can.

Thanks Bill
 

Brettman

Full Member
Joined
Jul 18, 2001
Messages
212
Loc.
Houston
Here is a shot someone's dash they did here on the board. This was similar to what I want to do. Should the owner see this I believe he/she has other shots of this install.

Brettman
 

Attachments

  • Dash Overlay.jpg
    Dash Overlay.jpg
    42.7 KB · Views: 275
OP
OP
D

deltarat

Bronco Guru
Joined
Jul 12, 2006
Messages
3,371
Loc.
Drew,Ms
That is similar to what I am thinking about.
I just think it would be so much easier to work on.
Anybody else with ideas or materials?
 

eb66to77

Bronc'Ownly
Joined
Mar 26, 2005
Messages
2,558
Loc.
NOVA
My buddy in NC has done this. The whole dash tips forward to access all hsi goodies. He even has his duraspark box on it and a spare. It is very handy and an awesome idea if you are building a trail rig that needs frequent under dash explorations. Also if you are bad at wiring, the under dash portion will be the worse part. Putting a hinge on it may eliminate the need to crawl under it to replace that wire you fried.
 
OP
OP
D

deltarat

Bronco Guru
Joined
Jul 12, 2006
Messages
3,371
Loc.
Drew,Ms
I am by no means a wiring guru. I can use all the help I can get. I was also thinking if I don't like the way it is arranged or screw up a hole, I can replace a 20.00 pannel instead of a 100.00 dash overlay.
 

Smokeater11

Bronco Guru
Joined
Jun 14, 2006
Messages
1,971
Loc.
Auburndale,FL
Check out gasspasser(may only have one s) he has the fold down dash and it is kick ass. I know he has pictures of it on Bfix but I'm not sure about here. On Bfix his name is PastheGas. He is the only one I have see so far with that setup and I intend to copy it myself.
 
OP
OP
D

deltarat

Bronco Guru
Joined
Jul 12, 2006
Messages
3,371
Loc.
Drew,Ms
Thanks,Smokeater that is what I had in mind. I was thinking about using ABS plastic. Does anyone know where I can get sheets of ABS?
pasthegas that was a cool idea on the dash.
 

Smokeater11

Bronco Guru
Joined
Jun 14, 2006
Messages
1,971
Loc.
Auburndale,FL
I'm not sure I would use ABS plastic unless you went with something fairly thick. I think it would have a tendency to vibrate a lot. Just a thought.
 

eds66bronco

Bronco Guru
Joined
Aug 3, 2004
Messages
1,119
Loc.
Essex, Vermont
that is what i did but ithout the hinge. very nice to work on wiring an you can move stuff where you want it. i used a sheet of aluminum, put the obital sander to it to kill the shine and give it a brushed look (to hide scratches).
 

Attachments

  • dash.jpg
    dash.jpg
    74.5 KB · Views: 153
  • dash2.JPG
    dash2.JPG
    76 KB · Views: 180
OP
OP
D

deltarat

Bronco Guru
Joined
Jul 12, 2006
Messages
3,371
Loc.
Drew,Ms
I was planning on 3/16 ABS, but would have to see how stiff it is.
Ed the aluminum looks good also.
The brushed look doesn't look like it would shine too bad.
What gauge is it?
It must tons easier to work on.
Thanks for the pictures.
 

gasspaser

Full Member
Joined
May 22, 2006
Messages
278
Loc.
St Petersburg FL
It was a great idea but not my idea, here are the pics of the set...excuse the wring nest's, this bronco is now body off, frame stripped and rebuild in progress.....
 

Attachments

  • DSC00445.JPG
    DSC00445.JPG
    53 KB · Views: 65
  • DSC00444.JPG
    DSC00444.JPG
    49.1 KB · Views: 62
  • DSC00443.JPG
    DSC00443.JPG
    49.7 KB · Views: 41
  • DSC00442.JPG
    DSC00442.JPG
    53.8 KB · Views: 43
  • DSC00441.JPG
    DSC00441.JPG
    56.1 KB · Views: 66
  • DSC00440.JPG
    DSC00440.JPG
    70.2 KB · Views: 60
  • DSC00439.JPG
    DSC00439.JPG
    64.4 KB · Views: 56
  • dash.JPG
    dash.JPG
    51.6 KB · Views: 51
  • DSC00449.JPG
    DSC00449.JPG
    41.7 KB · Views: 42
  • DSC00448.JPG
    DSC00448.JPG
    38.3 KB · Views: 67
  • DSC00447.JPG
    DSC00447.JPG
    49.2 KB · Views: 79
  • DSC00446.JPG
    DSC00446.JPG
    52.6 KB · Views: 53
OP
OP
D

deltarat

Bronco Guru
Joined
Jul 12, 2006
Messages
3,371
Loc.
Drew,Ms
I guess 8 or 10 screws wouldn't be bad to remove to get behind the dash. Thanks for the pictures guys.Would love to see if anyone else has any suggestions.
 

eds66bronco

Bronco Guru
Joined
Aug 3, 2004
Messages
1,119
Loc.
Essex, Vermont
deltarat said:
I was planning on 3/16 ABS, but would have to see how stiff it is.
Ed the aluminum looks good also.
The brushed look doesn't look like it would shine too bad.
What gauge is it?
It must tons easier to work on.
Thanks for the pictures.

not sure but it's about 14. got it from the scrap bin at a local metal recycler for a couple bucks. i really miss laying on my back with with a gas pedal sticking in the side of my head while my work light burns a tatoo in the side of my neck... butt half on the front seat with one leg dangling out the door contortion:p
 
OP
OP
D

deltarat

Bronco Guru
Joined
Jul 12, 2006
Messages
3,371
Loc.
Drew,Ms
eds66bronco said:
not sure but it's about 14. got it from the scrap bin at a local metal recycler for a couple bucks. i really miss laying on my back with with a gas pedal sticking in the side of my head while my work light burns a tatoo in the side of my neck... butt half on the front seat with one leg dangling out the door contortion:p

That is what I had in mind. Later when I add air or other things I could just redo that part with a new panel for a few bucks instead of a 100.00 dash overlay.Do the heater control cables have enough slack to let the panel pull out? My contortion hours are not as long as they use to be when I was younger.
 

Projp

Sr. Member
Joined
Nov 14, 2004
Messages
504
I made my dash out of pre primed galvanized metal. I goes by a few trade names...redicote or paint loc.
It is easy to work with and grounds. It can be painted to match or touched up easy.
We use it in my heating and A/C company, so that would be a good place to find some.
You would probably want about 24 guage.
 

Attachments

  • bronco dash.jpg
    bronco dash.jpg
    46 KB · Views: 111
  • bronco dash 2.jpg
    bronco dash 2.jpg
    40.7 KB · Views: 96

pmctighe

Sr. Member
Joined
May 30, 2006
Messages
361
Projp said:
I made my dash out of pre primed galvanized metal. I goes by a few trade names...redicote or paint loc.
It is easy to work with and grounds. It can be painted to match or touched up easy.
We use it in my heating and A/C company, so that would be a good place to find some.
You would probably want about 24 guage.

Did you remake the whole dash or just an insert like above? I can't tell from your pic's

Patrick
 

jimmyhat

Jr. Member
Joined
Oct 20, 2006
Messages
71
Projp said:
I made my dash out of pre primed galvanized metal. I goes by a few trade names...redicote or paint loc.
It is easy to work with and grounds. It can be painted to match or touched up easy.
We use it in my heating and A/C company, so that would be a good place to find some.
You would probably want about 24 guage.


where did you get that gauge thingy on the glove box?
 

Projp

Sr. Member
Joined
Nov 14, 2004
Messages
504
pmctighe said:
Did you remake the whole dash or just an insert like above? I can't tell from your pic's

Patrick


It is an overlay from the center of the steering column to the edge of the glovebox.
I cut the old dash out and left about an inch around the edges for support. I did leave the bottom of the old dash also.
 
Top