• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Rear seat belt systems

fishnxlt

New Member
Joined
Dec 26, 2006
Messages
29
Loc.
Sierra City
I need some advice on seatbelts for the little ones in the rear. I have seen a multiude of ways for installation. My concerns are that if the shoulders belts are attached to the family roll bar and you have a roll over and the bar partly collaspes and the retainers lock in the belt, it seems to me that the child could get squished. Then on the other hand, if the belts are attached to the floor using a 3 point or 4 point style harness you then would be releying on the rear bench seat to support the child and take the impact force. The rear bench seat does not seem all that strong to me. And finally, what keeps the family roll bar anchorage in place during a roll over when it is just bolted to the rear floor by the tailgate? Does anyone have some advice on this and can help sort out my paranoia on the kid issue? thanks!
 

musetech

Full Member
Joined
Jul 23, 2004
Messages
205
Loc.
Alexandria
Yes,

It's called take it easy with the kids in the truck. Just bustin your balls. Shat happens as we all know. I'm still on the back side of a family cage myself but the weakness of my rig and an ultra sensitive pucker factor tends to keep me out of trouble.

Seriously, I have the fold and tumble and bought a set of "retard" restraints from a school bus company (lost info but out of LA if I remember) that specialized in strappin the kids in that had a little trouble controlling their movements.

They actually had 6" straps to hook to the legs to control spaz attacks and such.

They have held up well and are essentially a cheap alternative to expensive five point harnesses and can be used with booster or regular car seats.

We have ours anchored to the floor behind the seat. But optimal anchoring would be just below the shoulder of the child. Maybe a small hoop but if you are going to go that far why not just install a cage?

Precious cargo indeed. Don't skimp in this area.

Yes thats a 33" off of a stock carrier...and she don't like it.
 

Attachments

  • Boys back shrunk.JPG
    Boys back shrunk.JPG
    87.3 KB · Views: 57
  • Reflection condensed.JPG
    Reflection condensed.JPG
    154.4 KB · Views: 74
  • Flag shade condensed.JPG
    Flag shade condensed.JPG
    143 KB · Views: 125

FFMDX

Sr. Member
Joined
Mar 12, 2004
Messages
542
Loc.
Roseville, CA
fishnxlt said:
. And finally, what keeps the family roll bar anchorage in place during a roll over when it is just bolted to the rear floor by the tailgate? Does anyone have some advice on this and can help sort out my paranoia on the kid issue? thanks!


Tie your cage into your frame. The seat belts/harnesses wil then be tied to-the cage-to the frame. It may have been on this site or Bronco Driver, they showed the aftermath of a roll with the cage only tied to the sheetmetal of the floor = UGLY! There are some nice 4/5 Pt harnesses out there for kids now...definitely an area where I wouldn't skimp.

Sean
 
OP
OP
F

fishnxlt

New Member
Joined
Dec 26, 2006
Messages
29
Loc.
Sierra City
thanks for the input. Museteck, your situation looks same as mine with the barck parto the roll cage- looks like a smittybilt. FFMDX, I think I will contemplate either adding a bar behind the rear seat when I create the family part of the roll cage or add a member from upright to upright at the floor line and bolt straight through to the frame.

I am just not sure of the geometry of the how the harnesses work in a collision if the angle of the harness is going to the floor at the back or to the bar installed behind the rear seat.

Any suggestions for the 4 or 5 point harness as to reliable brands and should I look for any DOT (dept of transportation) numbers?

Have a good new year.
 

FFMDX

Sr. Member
Joined
Mar 12, 2004
Messages
542
Loc.
Roseville, CA
I am just not sure of the geometry of the how the harnesses work in a collision if the angle of the harness is going to the floor at the back or to the bar installed behind the rear seat.

Any suggestions for the 4 or 5 point harness as to reliable brands and should I look for any DOT (dept of transportation) numbers?

Have a good new year.

I'm pretty sure i saw some kiddie harnesses by Simpson in the new Summit catalog. Crowe is the brand that I'm using up-front (no kids yet until March!!) As far as DOT...I don't think these harnesses are DOT legal, but NASCAR uses them and seem quite a bit better that some of the OEM jobbies out there. Maybe someone will chime in that's has a whole lot more knowledge in this than I do. The shoulder harness should be ~4" below the shoulder, any lower, at impact the harness will pull you down and make a bad day worse....
 

4x4x289

Sr. Member
Joined
Mar 15, 2004
Messages
966
I tied my rear hoop to my frame using 2x2 tube, and use Corbeau Black 3 point Retractable Snap. These belts allow some mobility.
 

Attachments

  • reartube6.jpg
    reartube6.jpg
    66.1 KB · Views: 110
  • reartube4.jpg
    reartube4.jpg
    58.9 KB · Views: 136
  • reartube3.jpg
    reartube3.jpg
    113.4 KB · Views: 106
  • reartube1.jpg
    reartube1.jpg
    92.5 KB · Views: 111

SteveL

Huge chevy guy
Joined
Jun 24, 2001
Messages
11,969
Loc.
Hawthorne ca
I used diest buggy harnesses tied to the seat which is tied to the cage. I for now I also keep her in a booster seat for the extra neck support. On my other one I built a stout seat frame bolted to the inner fenders snd put the same belts to the seat frame. I still need to do the bar to frame tie ins. That simpson seat is just a regular child seat with a simpson cover for an extra $40. Pep boys sells em too.
 

ROKDWLR

Bronco Guru
Joined
Dec 3, 2003
Messages
1,016
Loc.
Stockton, Ca.
4x4x289 said:
I tied my rear hoop to my frame using 2x2 tube, and use Corbeau Black 3 point Retractable Snap. These belts allow some mobility.

X2 on the Corbeau retractables. I've had them in the front for about a year and am very happy with them. My current EB upgrades will include a new front and rear Mastercraft seats, cage mods and 2 more Corbeau retractables.
 

eds66bronco

Bronco Guru
Joined
Aug 3, 2004
Messages
1,119
Loc.
Essex, Vermont
here's mine.. fold and tumble from and amigo (i think) with the Corbeau 3 pt's mounted to the cage as well as the seat. one thing to keep in mind is the cage ties into the c-channel/rear body support. this is the same member that the rear body bolts tie into. unless you have massive amounts of body rust back there, this is a very stout tie-in point for a cage. the nice thing is the head rests keep the harnesses from slipping to the side. the only thing i don't like is the sliders on the shoulder harnesses loosen up as the kids wiggle around. force of habbit now is to reach back and snug them up prior to any pucker factor spots on the trail.
 

Attachments

  • BackView.jpg
    BackView.jpg
    156.3 KB · Views: 106
  • SideView.jpg
    SideView.jpg
    138.1 KB · Views: 82
  • TopView.jpg
    TopView.jpg
    183.5 KB · Views: 97

kntr

Bronco Guru
Joined
Oct 7, 2006
Messages
2,277
I would think it would be safer to install the strap straight back rather than at an angle.
 
Top