Search results

I was asked a question that I did not have a good answer for. The guy has a bronco with an ax15 in it. Says he hates first gear. Its too low . I told him the AX15 docent have a real deep first gear. I also added that it has the highest first gear in any trans that will adapt a transfer case...

I have installed a new H Roller cam into a 1986 302 truck motor. It has the stock pedestal rockers. I knew I was going to need longer pushrods due to the smaller base Dia. of the new cam. So I got my pushrod checking tool and figured out I needed 32 thousandths longer pushrod to get to zero...

I have an E7 block with a push in pan mounted dipstick. The dipstick tube is missing so that means I need to find something that fits. The push in pan mounted tubes are my least favorite design. it's almost worth buying a new pan to get the screw in dip stick. I was wondering if anyone has...

Anyone that takes a dana 20 apart knows that the shift fork set screws can be a real pain! I got all the right tools to do this job but last night these set screws kicked my but. 2 hours to get 2 set screws out! I swear the factory must put lock tight on them. I ended up drilling one of...

converting from drum to disk on my f100 axle. I need knuckles and caliper brackets.

I was putting the tag renewal sticker on my 71 bronco when I noticed the Vin number was wrong. The paperwork had the U15 as a V15 ? I made an appointment and went to the DMV office today. The guy I got was real nice but needed to get help from a supervisor. Supervisor did a deep dive into...

I started another bronco build a while back. The frame and running gear has been done and I am doing body panel replacement. Well that's how it started but as I got into it it became evident that very few pieces of the body were worth repair. I had already purchased about half the panels when...

This is some of the stuff I picked up at BMC house. You could say that I have a little project on my hands. Running gear is done but now it body rebuild time. Thanks for the smoking deal Bill. You know I love it.

I have a 302 out of an 87 truck. It is a roller block. It was am automatic but I have an AX 15 to go behind it. What flywheel do I need? pretty sure I need an external balance, but I dont know the weight or tooth count.

This is weird, when I open classic broncos it goes straight to Fatboys post In the off topic El kabong thread about the cancer topic. Everytime I open classic it goes straight to that thread and to Fatboys post. It doesn't really bother me but it is different. I wonder what I did to screw...

I have a 302 roller motor I am rebuilding. I would like to know If any of you have a favorite camshaft the you like? I need to purchase one so I am looking for recommendations. 70 % street 30% trail. standard trans (Ax15), carb. Not looking for anything nasty that won't idle down a trail...

Some of my car friends egged me on to take the bronco to their ( Lions Club) car show. The truck had not even started in a year at least. Took the cover off and cleared the crap out of the way. Turned on the pump and hit the starter. Boom she started right up. This is odd because this truck...

I was taking apart a gear case so I could clean it all up. I had a hub tool on the table. Did you know that these, fit this? Am old and I never knew this, fit that. So I thought I would share so some of you could say , You didn't know that? and others could say, wow I never knew that! At...

I am thinking what would be best for on board air. If you have air lockers you need a compressed air supply. Would a small air compressor work better than pressure tank? I like the pressure tank option. It seems more compact and simple than mounting up a compressor and having to wire it in...

It fit I'm my carport pretty well

Yes its time for me to buy the guts for both front and rear axles. I have bought a lot of this stuff throughout my addiction. But I can honestly say I don't have a favorite go to for this. I have had decent luck at the bronco vendors because they generally in tune with what I am looking for...

Are we doing this? Is there a bronco wave? There are quite a few new broncos running around town. Their all waving at me in the old bronco. Is anything official , I mean what are we doing. I dont wave at the jeep people and many of the new bronco people are really just jeep people. I know...

Ok. some quick history. explorer motor 96 0bd2. Been running 5 years no issues. I was steady driving about 45 mph, the motor lost power and quit running. It would not restart. I towed it back to the house. My first thoughts were crank or cam sensor. Plus the front of the motor was pretty...

I want headers and dual exhaust! However I am not sure I can run headers. Currently my set up is an explorer motor and a 4r70w to an atlas. I fun stock bronco manifolds into a 2 into 1 system. I also have a high pinion in the front. The drivers side pipe has to be bent very close to the...

I put an Apple air tag in my broncos. I didn't used to think much about them getting stolen. But with the interest in broncos I find more and more people looking at it in the parking lots. I mean face it, they are easy to steal if someone wanted it. I really wonder about some of the people I...