Search results

Looking at mocking up the 5.0 to the ax15. The roller motor is missing the bolt hole that the clutch bracket bolts to. Is there an aftermarket fix for this? Little help pretty please. Bax

I am building up another front axle and am missing these parts.

I have a new build that I am starting work on. I got 15 years of bronco parts packed away. The frame build up will not be too costly, but this body is rough. I have made an extensive list of body parts. Then I made up "wish lists" on 2 different vender web sites. Now it has been a while...

How are the companies like Velocity and Icon and others getting a Title for their products? It is too the point where broncos are being built with zero original parts used. How are these titled? They have no vin numbers. Is there as built title? I do know how easy it is to swap titles and...

Thats correct. The only surviving relict left from the famous" Island Queen" Bronco. I present you her Tiki Torch. It is the last known piece known to exist. I will put this treasure up for bid. Act now this won't last.

Well I have been waiting over 4 months but UPS brought me a little somthing. I think it is time.

EB width dana 44. F150 knuckles, ford disk brake set up. Factory 4.11 with a trac loc. ford hubs and stock axles. Pulled this to install my high pinion axle. You will need brake pads and calipers. This is all in good shape. SOLD

Yep just saw an add for the new broncos. Pretty quick, shows the 3 models and a few other shots. then the date July 13 .

I ordered parts for my dana 44 HP disk brake axle. I needed the normal stuff. spindle bearings and seals, some ball joints and spindle bolts and nuts. Some of the bolts were not in great shape so I figured I would replace them. I had received everything I had ordered except the bolts. I did...

I am looking for a ring and pinion gear set for a dana 44 High pinion. ( reverse rotation) anyone got one they want to sell? Thanks Bax

The 66 u14 has been gone 15 years. literally rusted in half right behind the seats. I had junked most of the parts a given away many of the others but I saved my vin tag. Problem is I lost it. This was long before anyone cared about how Rare or closest to first one made, ect. so I would like...

I have had good service out of both. The track lock seems to be easier to find. The Power loc I'm my opinion was a stronger unit. So I started looking for another one to set up my high pinion 44. Not much luck finding them. Did Dana stop making the power loc? I can't find one for sale new.

To those who may be running a Spartan locker in their dana 44. I understand it will work fine on the street with the hubs unlocked. How well does it work in 4wd on the street and on a dirt road. Who is happy? I have the opportunity to pick up one pretty cheap and was wondering if it was...

My Daughter sent me this. Bronco spotted near Missoula MT. Looks like a nice one. Anyone on here?

Water pump replacement on a 5.0 explorer motor is a pretty easy job. Until you twist off 2 of the long bolts that go to the block. That was my day. She is fixed now and I had a great time. F Me Running. I knew I was in trouble when I noticed the 2 problem bolts had been rounded off and one...

So the motor runs and idles fine, Pull the trans into gear and it stalls the engine. So I rase the idle, same problem. Raise it to 1200 rpm. Drop it into gear, motor almost will stall unless you let the truck roll. Could this be a Torque converter issue?I have lost a sprag in a TC and had no...

37'' tires, 1/2 ton chevy disk on the front and 3/4 ton chevy disk on the rear. I have an astro van hydro boost with a corvette master cylinder. The master cylinder is a disk / disk design. I am currently running without a proportioning valve in the lines. All my lines are the same Dia...

I have been working a little more on my bronco. I have it driving better than it ever has. But to do this I had to sacrifice pinion angle by leaning the axle back in the top to get my castor angle back. The truck is lifted and it has a 205 transfer case. So with the lift and the higher...

I'm looking at a dana 44 out of an EB and one out of a 150. It looks to me like the wedges are different? Im talking about the weld on ones , not the cast wedges. It looks to me like the angles on the sides of the wedges are different. Am I correct on any of this? I am getting ready to...

Last week I ordered Wild Horses stainless M1A1 gas tank. It was pricy, but I was hoping it would be a quality item. It arrived on Monday and when I opened the boxes I was very pleased with what I was looking at. The install went well. I had built a trailer hitch that was in the way so I had...