• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. Tjboriack

    Bronco Cooling System

    see the image - the air flow pull can hold cardboard on the front of the a/c/ condenser at an idle
  2. Tjboriack

    Bronco Cooling System

    I am curious as to the thoughts of how much heat the transmission may be adding if the lines are flipped. looks like I have hot/pressure going in on the lower port, and the return to the transmission out of the top of the radiator.
  3. Tjboriack

    Bronco Cooling System

    base timing was at ~20 degrees - moved it back to about ~10
  4. Tjboriack

    Bronco Cooling System

    The air dam looks pretty good installed.
  5. Tjboriack

    Bronco Cooling System

    Alright folks - I finally had some time to get back to the Bronco. I have made the following changes - moved from a 5-15/16" water pump pulley to a 5" pulley, and changed the antifreeze to a 60/40 water/antifreeze mix. Rechecked the timing and the base line timing was running close to 20...
  6. Tjboriack

    Bronco Cooling System

    just ordered it, it's an easy add-on that I can do when I tear into it next and plenty of people on a variety of threads in this forum have mentioned adding it.
  7. Tjboriack

    Bronco Cooling System

    have tried the A/C - it is fine going down the road - does at a few degrees, but not horrible. Sitting in traffic it definitely runs the temp up faster, so I just leave it off for the most part. also cruise with the windows down for the most part, so no use trying to air condition the world...
  8. Tjboriack

    Bronco Cooling System

    pretty certain the rotation is correct on the water pump - been a little while since I replaced it but was a big watchlout for me then. Have thought about something separate for the trans cooler - just working through the other steps I have available first.
  9. Tjboriack

    Bronco Cooling System

    Thanks for the notes Gauge reads correctly - have been tracking with a laser thermometer for awhile. Plan on going to a 180 degree t-stat once I figure out the temperature issues. Right now running a 160, 180, or even a 195 won't make a difference - they are all wide open as the engine...
  10. Tjboriack

    Bronco Cooling System

    thank you
  11. Tjboriack

    Bronco Cooling System

    here are a couple of pictures of the engine compartment prior to cutting the shroud. the top of the fan was completely covered.
  12. Tjboriack

    Bronco Cooling System

    any one have a stock factory engine that can measure the water pump pulley diameter and the crankshaft pulley for me?
  13. Tjboriack

    Bronco Cooling System

    Yes I have an A/C and the condenser sits in front. It has been a concern of mine, but everyone I talk to doesn't think it is an issue. More people comment not he Staggered 4-Core Radiator over the condenser. Explorer front end is an option, but trying to not go that route if I can. still...
  14. Tjboriack

    Bronco Cooling System

    I have about 1.25" from the fan blade to the radiator up top and about 1" at the bottom. from the leading edge of the fan to the back of the shroud, up top I have just under 1" and at the bottom I have just over 1".
  15. Tjboriack

    Bronco Cooling System

    Thanks for the input on the timing. It will be a week before I am able to do anything else to it right now, but will recheck timing when I get a chance. still have the 5" water pump pulley coming in as well.
  16. Tjboriack

    Bronco Cooling System

  17. Tjboriack

    Bronco Cooling System

    I know there have been many threads discussing cooling and issues folks have going on; with a myriad of folks having different solutions. I have had cooling gremlins and have done a ton to try to work through them, only a couple more pieces to work through to see if that provides some...
  18. Tjboriack

    United Pacific Sheet Metal

    goot to know. Thank you
  19. Tjboriack

    United Pacific Sheet Metal

    thank you for the feedback - I will check out dynacorn as well - guess I didn't realize they were up the road. I was leaning Dennis Carpenter if I didn't do UP. The struggle is real! For me right now I guess it is more for the quality of the metal. No one is using domestic metal, and I...
  20. Tjboriack

    United Pacific Sheet Metal

    Does anyone have any experience with United Pacific sheet metal body parts? They are just down the road from me so it is savings on shipping as I can pick-up, but haven't heard many reviews on their product. If not United Pacific who do you recommend and why? Yes I know most sheet metal needs...
Top