• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. Tjboriack

    Ford 9” Rear-End Housing

    Apologies - I need to figure out the quoting - doesn’t work so well from my iPad for multi quoting. Checked with JBG and Yukon - the complete new third member comes built with the solid spacer/shims/crush washer eliminator. So add the yoke and go. Neither seemed to concerned that I was a...
  2. Tjboriack

    Ford 9” Rear-End Housing

    Hey Paul - the eliminator is a shim, i guess some call it a crush washer eliminator. I purchased by New 3rd member from JBG with a Yukon locker. It shipped from Yukon. I will find out tomorrow if it was shimmed or if it has a crush washer and hopefully have a better idea then. Test drove...
  3. Tjboriack

    Ford 9” Rear-End Housing

    Thanks for all the input. The install of the new third member and axles went well, we will see if the left side leaks or not, if it does I will most likely put a new housing under it. Quick questions though - has anyone installed a new Yukon third member? Do they use a crush washer or an...
  4. Tjboriack

    Ford 9” Rear-End Housing

    I installed the disc brake conversion (from Wildhorses) in May 2019. I have attached a picture of the spacer/bracket I am talking about. It originally rode between the bearing retainer and the housing bracket (with the t-bolts through it). Just trying to determine if I still use this or not...
  5. Tjboriack

    Ford 9” Rear-End Housing

    Thanks Paul. The information is greatly appreciated. I may try to see if it will seal as suggested, if it doesn’t then I will most likely come back and put a new housing in. In regards to the disc brake baking plate that was between the bearing retainer and the housing plate - you would...
  6. Tjboriack

    Ford 9” Rear-End Housing

    Correct I have concerns of the new style bearing and seal seating far enough into the housing because of previous damage. If they don’t seat all the way I have concerns of bending the retainer plate and causing alignment issues with the disc brakes I added.
  7. 1974 Ford Bronco

    1974 Ford Bronco

  8. Tjboriack

    Ford 9” Rear-End Housing

    I am in the process of upgrading to a new carrier with a new third member and 31 spline axles. I have everything torn down and while getting it cleaned up to go back together I notice that the left side has quite a bit of damage where the axle bearing should ride. Looks like someone beat the...
Top