• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. 67 Halfcab

    6r80 length, with adapter for Atlas (or D20) and Atlas if you would...

    You should run down to Kelleher Motors and start crawling under a truck with a tape measure and see what they say! ;D
  2. 67 Halfcab

    408 EFI intake sanity check

    That's what this thread is about. :p Is there an intake assembly that will flow better than my Lightning/Explorer combo, but will still fit under my stock hood and 2" body lift. ……..and I can't go too crazy. My wife already scares me in her Fusion Ecoboost! ;D
  3. 67 Halfcab

    408 EFI intake sanity check

    I'm telling Woody to build the engine to run best between idle and 4500. Garry says my intake combo flattens out at about 4400, so really, I should be fine. (Maybe send it off to TMoss and get it ported?) On the throttle body, I was leaning towards Accufab. Seems BBK is hit or miss. Since...
  4. 67 Halfcab

    408 EFI intake sanity check

    EFI Guy is doing my tune. 8-) I was just trying to find out if there was a better flowing intake with a bigger throttle body opening for my limitations before I spend money on a throttle body. Speaking of throttle bodies, does anyone have a brand they recommend?
  5. 67 Halfcab

    408 EFI intake sanity check

    Recently I put down my deposit on a Fordstrokers 408. I did a lot of searching of the forum, but want to make sure I have the right answer before I go down the rabbit hole of component selection. My Bronco has a 2" body lift with new poly bushings, and I don't want to go up to a 3". Is the...
  6. 67 Halfcab

    Fan clutch clearance

    Do the Explorer swap and don't look back.
  7. 67 Halfcab

    HP Dana 44 cast ends cut off

    Pack the inside of the axle tube with dry ice and wait for the tube to shrink. Pre-heat the cast piece so it expands, and slip it over the tube. Pull the dry ice out of the axle tube, and let the assembly come to ambient temperature. Weld. This is how I did mine and it slid right on.
  8. 67 Halfcab

    Small card board tubes in instrument cluster

    Nick at Northeast Classic Ford Parts has them. https://northeastclassicfordparts.com/search?controller=search&orderby=position&orderway=desc&search_query=cluster&submit_search=
  9. 67 Halfcab

    5.8 Lightning lower intake casting number?

    The search continues...…...;D
  10. 67 Halfcab

    5.8 Lightning lower intake casting number?

    Here are some pics
  11. 67 Halfcab

    5.8 Lightning lower intake casting number?

    I think I may have located a 5.8 Lightning lower intake, but want to verify before I pull the trigger. Next to the distributor area, the casting reads: RF-F9TE 9K461 EA Can anyone verify this actually is a 5.8 Lighting lower intake? Thanks!
  12. 67 Halfcab

    4r70w and headers

    I tried a couple of different sets. The Bronco Hut shorties worked the best in my case.
  13. 67 Halfcab

    Western Washington peeps: machine shop recommendation?

    I'm in research mode for a new engine this winter. Currently trying to decide between a crate engine or getting one built locally. Does anyone have a recommendation for a good machine shop between Tacoma and Portland, preferably in the Olympia area?
  14. 67 Halfcab

    Mustang 5.0 engine swap, I got questions

    Serp system is Loooong. Go with the Explorer setup. The passenger side header dumps right on the frame rail. Send your ecm to EFI Guy (Garry) and get the capacitors changed out.
  15. 67 Halfcab

    GIVEAWAY CB.com Giveaway - $150 gift certificate to any site Vendor - Ends Sat Aug 17, 2019

    Congrats to the winners. Thanks for the opportunity, Jon!
  16. 67 Halfcab

    TBP Premium Seat height?

    Thanks. A little better than what I have right now.
  17. 67 Halfcab

    TBP Premium Seat height?

    Looking or a measurement of how tall the seating surface (where your butt hits) is on the TBP Premium seats. I searched and searched, but could only come up with a measurement of "about 2 inches higher than stock seats". The problem is I have never had stock seats. Can anyone give me a...
  18. 67 Halfcab

    Bronco Hut headers + 4r70w

    My set of BH ceramic shorties will be delivered on Thursday. I will report my personal fitment after they are installed. 8-) For the record, my combination is '89 Mustang 5.0, '99 Explorer 4r70w with stock trans fill/dipstick tube, 2" body lift, and WH Extreme engine mounts. Thanks for all of...
  19. 67 Halfcab

    Bronco Hut headers + 4r70w

    Thanks, Viper!
Top