• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. STalon89

    Explorer 302 build

    So a couple years ago I came across a reman 97 explorer 302 engine. Im not getting to the point where its time to get it finished and in the truck. I am going to run stock front drive, sniper efi, c4 tranny, no AC. Basically need to know what Im overlooking that this engine may have that...
  2. STalon89

    Radius Arms/Caps

    Powdering my radius arms and before I get too deep wanted to get thoughts on this. Are the caps specific to the side and arm? Or are they interchangeable? They seem to be symmetrical
  3. STalon89

    Best Aluminum Radiator!!!

    Champion is your best bang for your buck. Ive put it through its paces with extended trips, hot weather etc. And it looks proper, not something you robbed off a late year vehicle
  4. STalon89

    74 Coyote/6r80 build

    Couldnt have built this truck without all of the resources of this forum. Big thanks to all who helped along the way!
  5. STalon89

    74 Coyote/6r80 build

  6. STalon89

    74 Coyote/6r80 build

  7. STalon89

    74 Coyote/6r80 build

    Sorry I went dark! Truck was finished and I ended up selling at Mecum Dallas. Hell of a ride it was building and a great ending!
  8. STalon89

    74 Coyote/6r80 build

    Ron Davis JB Fab has what you need
  9. STalon89

    74 Coyote/6r80 build

    Went with JB Fab for linkage
  10. STalon89

    Interior

    Buy the cheap metal ones, so if you have to modify them you can (fitment, speakers, etc) and bring them to get upholstered after
  11. STalon89

    Disc brakes not compatible with new axle studs, help please

    I had the same issue with my brakes and them making contact with the studs. Make sure your new axles are correct for the bearing size of your rear end (small large or medium duty) 77 is large I believe
  12. STalon89

    EFI- Pro Flo or Sniper etc.

    Looking to get things in order for a winter project and Im unsure which route to go for efi. The truck is very original and still running all the factory stuff. Fuel tank, air filter, carb etc. What system do you guys like?
  13. STalon89

    Coyote, 6R80, Dana 20, front driveshaft options?

    Clock it up one. Just sitting in the wrong position
  14. STalon89

    Wilwood brake issue

    This information is incredibly helpful, I appreciate it. I have a 1" master incoming and will make that swap to see if it corrects/helps things.
  15. STalon89

    Wilwood brake issue

    I noticed this issue right away during the seating process. Literally not enough stopping power to begin to seat them
  16. STalon89

    Wilwood brake issue

    1.12 The wilwood proportioning valve has that adjustment yes. I did mess with that as well
  17. STalon89

    Wilwood brake issue

    Thanks for all of the responses
  18. STalon89

    Wilwood brake issue

    I too bought the expensive tool to measure that haha. I havent tried bringing it out any further to test that yet. I assumed if it was push rod related I would get a different feel in the pedal
  19. STalon89

    Wilwood brake issue

    140-13303N is the front kit, 140-13664N is the rear. Running the stock pads that came with the kit. Im not sure the size of the booster. It looks to be aftermarket but it was assisting 4 wheel drums before I made the switch. I tested the check valve, and tested that the booster was holding...
Top