• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. STalon89

    Raptor Liner - Sand or Prime pre-primed floor pans?

    Regardless if its bare metal or primed, as long as you do the prep work and de contaminate, there should be no issue with adhesion.
  2. STalon89

    Gas Door Installation for Pre-1977

    Looks great. Nice work!
  3. STalon89

    BCB Sherman Tank arrived! (damaged)

    Agreed. Open it up, blow it out and make sure your internals are all attached as they should be. Better now than later.
  4. STalon89

    Raptor Liner - Sand or Prime pre-primed floor pans?

    I went over primer. Just make sure everything is sanded and decontaminated. 3 bottles of raptor liner covered my tub. Just buy the kit and you will have enough. Make sure you walk around with a rag of alcohol or thinner and look for overspray while its still wet, its tough to remove once dry...
  5. STalon89

    Coyote Engine - Parts List and Info For Install

    This is what I went with. https://www.wildhorses4x4.com/product/Sherman_Fuel_Tank_EFI_Kit_23_Gallon/Bronco_EFI_Tanks
  6. STalon89

    My coyote nightmare

    Measuring tonight. Sorry, weekend was a bit crazy and couldnt get to the truck
  7. STalon89

    My coyote nightmare

    I can measure it for you today. Its out of truck right now anyway. Link below is the kit I went with. https://bcbroncos.com/shop/steering/steering-columns-shafts-wheels/42-21102-steering-column-kit-for-coyote-with-manual-for-early-ford-bronco/
  8. STalon89

    Fuel Tanks - Help Me Pick One!

    I am running the BC efi tank. Just run air through it quickly. Also, stuff can shake loose during shipping, so its best to pull the cap and inspect anyway.
  9. STalon89

    My coyote nightmare

    Yea your column looks long. When its shorter, theres room to redirect it a bit, and get you off the valve cover. I only cut my passenger side. I am running an ididit tilt column with borgeson u joints, and just a plain shaft that I had to trim a bit to get the right length. Borgeson 4 turn...
  10. STalon89

    My coyote nightmare

    My column didnt hang up, but the set screw nut on the Ujoint hit the motor when I turned the wheel. Im using the column support bracket to push the column a bit up and towards the inner fender to have clearance. Are you using a spacer on your steering box?
  11. STalon89

    What year turn signals to to this grill??

    http://classicbroncos.com/turn_signals.shtml
  12. STalon89

    RIP trail buddy

    Incredibly sorry for your loss. My 2 boys love being in the bronco as well. From the pictures you posted, it looked like he had an amazing life.
  13. STalon89

    For Those Of You Who Have A Working Coyote Bronco

    I dont think drivability should be the concern. The issue is wrench time/cost to make it work. The coyote is going to run as expected, but the problem is time spent making it work in the truck. You'll need a lot of swap specific parts, and as you can imagine, not cheap. If I didnt have a...
  14. STalon89

    Steering Column Length with body lift

    A couple companys make a telescoping steering shaft. Thats what I would get.
  15. STalon89

    SOLD Gas Monkey Garage Bronco on BaT

    Yea I expected much nicer, being a highlighted build. Not impressed
  16. STalon89

    Fender flares

    I have the flexible ones from TBP and Im happy with them. Painted with Trim Black from SEM
  17. STalon89

    Duffy's 77 Build Thread- Restomod, daily, re-uncut

    Love this build. Interior is looking awesome!
  18. STalon89

    Aftermarket Seat Reviews

    I bought the bestop trailmax 2's for one of my trucks, and Im not too fond of the material. I know its made to withstand the elements, but its a little to plastic like for my taste. I prefer my restored stock seats.
  19. STalon89

    Which Paint Type

    I went with PPG and I'm glad I spent the extra.
  20. STalon89

    My coyote nightmare

    Yea it looks like that kick might be a little too sharp of an angle. But could be doable. I'll be interested in how it plays out.
Top