• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. R

    2 VINs, 1 Bronco

    Where is there a “body “ VIN ?
  2. R

    Which AC kit?

    I’ve installed vintage air on my 77 K-10 and our 65 Falcon wagon. Both seem to work well. I’ve not noticed any issues with no fresh air intake I suspect there are so many places where fresh air leaks into the old cars thats it’s not an issue .
  3. R

    74 steering column assembly diagram?

    edit; the T bolts hold it all together? didnt notice that when i took it apart putting my 74 steering column back together after replacing the bearings, and evidently ive already forgotten how it came apart. trying to figure out how the stuff at the top goes back on. bearings snap ring...
  4. R

    easiest way to remove tubes inside frame at steering box?

    Also My forward drivers side body mount is welded to the frame and the passenger side is riveted How were the drivers side ones installed originally ?
  5. R

    easiest way to remove tubes inside frame at steering box?

    was way too easy. think thats part of the problem. but I also have a 76 chevy K10 and the frame on it is spaghetti city. not only do they break around the steering box, they even crack around the shock mounts. at least the Eb has a boxed frame.
  6. R

    easiest way to remove tubes inside frame at steering box?

    well, that didnt take long, i used a 18 inch long chisel and a BFH, knocked right out.
  7. R

    easiest way to remove tubes inside frame at steering box?

    thanks I dont have an air hammer, yet. i do have a hefty bosch electric demo hammer / drill
  8. R

    easiest way to remove tubes inside frame at steering box?

    im reinforcing the frame under the steering box, while red head is rebuilding the box. im also replacing the upper and lower bearings in the collumn and the pitman arm, I have purchased the inside and outside the frame plates, i could see the box flexing on the frame while someone was...
  9. R

    Door hinge replacement experts atlanta area

    there was a place in East Point called Off Road Atlanta that seemed to do pretty good work. i never had anything done there though.
  10. R

    anyone in Moab 3-19/20 ?

    anyone in Moab this weekend? my son is passing through tonight/tomorrow, has a day to kill, and was looking for a quick ride.
  11. R

    Is There any way to escape Chinese junk?

    I replaced a clutch on a 90 F150 and it was a nice totally random mix of metric and standard.
  12. R

    info for EFI ?

    He keeps sending me ads for engines for me to look at, engines that are no longer in the vehicle. “The ad says It runs good and the trans is good “ My response is always : “ if you can’t hear it run, just assume it’s junk and will need a full rebuild “ In keep telling him that he needs to buy...
  13. R

    info for EFI ?

    I know this has been covered before , but im evidently terrible at searching. I have an acquaintance thats looking to install an efi 5.0 in his 49 Ford pickup, I suggested a pre 2002 2wd explorer, since he could use the engine trans and rear axle, but some one else that he talked to said that...
  14. R

    When is it no longer Ford Powered?

    It would be more reliable and cost a lot less expensive to maintain.
  15. R

    BC Broncos soft top for sale?

    I wish someone would make a top thats a copy of the wrangler , flips up and down easy.
  16. R

    Insurance Question

    they do an appraisal without actually looking at the vehicle ? and it will hold up in court?
  17. R

    Insurance Question

    most collector car insurance will NOT pay if your bronco claim is not on pavement. some policies state they will not pay if the Bronco is on an unpaved road. this includes dirt roads in state park campgrounds even though Hagertys commercials show classic vehicles driving on dirt roads, they...
  18. R

    Coyote or Ecoboot 3.5?

    My son has a 65 Falcon station wagon. I’d be interested in more info about the ranchero mods. You going with AWD in the Ranchero? Using the exploder as a donor ? The wagon has a strong 302 with a lumpy cam, and vintage air AC, but he wants to use it as a daily driver, long distance cruiser...
  19. R

    Wheel size question / rant

    What’s the preferred backspacing for a 74 Dana 44? Also it’s getting hard to find tires for 15” wheels And I’d stay away from the BFG MTs I have a set on my EB and Their new tread design Is very squirrely It’s all over the road and their old tread design was fine
  20. R

    Cost of A/C Installation

    What’s the deal with the cooling ? A decent fan and shroud doesn’t work? I’ve installed the Vintage air kit on a 76 chevy pickup and on a 65 Falcon station wagon , Both were pretty straightforward , both required some custom bracket mods for the compressor but the 76 chevy has an LS engine and...
Top