Search results

Thanks Guys, I appreciate the help. -Patrick

I have a couple of quick questions regarding POR-15. First off how hard is it to crack things like bolts and fill plugs after painting over them with POR-15? Second I have a NV3550 that I want to paint with POR-15, the problem is that its pretty oxidized so its covered with kind of white powder...

I bought my advance adapters pieces for the nv3550 swap from Randy at Adventurous 4x4 301-791-6869. I had already picked up a used low mileage trans from car-part.com. Randy gave me a good price (less $$ then high-impact). I am sure he can hook you up with the kit complete with a new trans if...

Thanks Hot Wheels and broncnaz for responding. Any one have any ideas on how I should go about cleaning up the seperated transfer case? -Patrick

I live in Missoula and would agree that Tom's will soon be the closest. But any way you go you will have to pay shipping so I just order from where I find the best price.

I am planning on painting my Bell housing, NV3550, and D20 with silver Por-15. But first I need to clean and degrease +30 years of crud off of the bell housing and t-case. My question is can I safely use a pressure washer on the bell housing to get the crud off? or will it rust up on me. I know...

Would I have to be worried about the solvent damaging the seals of the tranny? Thanks for the help, pgilchri

I ordered an NV3550 from a salvage yard on car-part.com and when It arrived I was horrified to find that they had removed the shifter and shipped it with an open case! I was wondering if anyone had any suggestions on how to flush the case to remove any contaminants that may be in there? I want...

saddleup Ill ask them about the accessory package for you. Can anyone tell me how long you normally get in a warranty from a salvage yard? The problem is I was just planning on slowly getting all of the components as I can afford it, and as I find deals. So it may be like 6+ months before I...

Thanks guys! It looks like I am going to be buying an engine! -pgilchri

I have a couple of pricing questions that I could use some help with. I found a yard that will see me a 96 Explorer 5.0 with 54K miles and good compression for $650. I told him that I was interested in a complete motor (power steering pump, water pump etc.) for the swap, he replied that he would...

I had a similar question. I was wondering if the long tube hedman headers (89410)from Jet-Hot would work with the NV3550 conversion. I was planning on doing the conversion in the future but was interested in headers now. Thanks in advance, -pgilchri

Can anyone tell me what the wire coming out of the drivers side of the case on an NV3550 is for? and whether it is needed for the bronco swap? Thanks in advance, -pgilchri