Search results

Getting ready to re-do all my suspension. going with 3 1/2" lift with long arms. think I am going to with F250 mounts for the front. not sure what to do for the rear. I have 3" body lift. it is 90% off road. you all got any pics and links, would love to see8-)

installed my WH header and broke the dipstick tube off right at the second barrel flare. would I still need a new tube, looks like it needs to go in further? it is push in on drivers side block (93 mustang block I think). What are you all using with headers?

Not sure what to ask for these. I have a pair on the rear of my bronco and they work great. I needed the stud mount for the front and besides going to go with a 3 1/2" lift and these are just taking up space. Let me know what you think.

is the rear transmission seal very hard to change on the C4? doesn't look too bad, any tips. I suppose it is what is causing tranny fluid to fill up the t-case

looks like my front top shock mounts have been altered. was wondering if anyone knows how tall the stock top shock mounts are? going to order new shocks anyway, I can measure to try and get the right length's but curious on the mounts

I have about 12 wheel bearings I need to check/pack this spring. has anyone used the wheel bearing packers? no they work well, are some better than others? my hands start cramping up after a little while, getting old I guess.:(

Wonder if we could get a better deal on shipping if bought a bunch of large parts at once. has anyone checked into it. I haven't contacted any vendors yet for a quote, until I get closer to buy. here is what my brother and I will be needing. 2 front right fenders 2 left front fenders one set of...

I need to clean out my tank, tired of replacing and cleaning out the filter. I just filled up the other day%) so it will be a little while before I do it. It's a 23 gal tank, at least it does have a drain plug. is there a good solvent to clean it out with? maybe a gallon of chemtool, suppose I...

what do you all think would be a fair price, 1999 explorer, 160k eddie baurer, auto, runs and drives. I don't need it or want it. just wondering what the going price might be.

when did they change the shaft size? my linkage is 3/4" that goes through the windshield, the holes in the frame are 5/8". I have another piece of frame and the holes are the right size. just wandering when they changed sizes. I don't have any bits that big, well that are sharp anyway. another...

I found a hose under the bronco. pretty sure it's a vacume line. it's by the transmission, has a plastic barb connector on it. it looks to be about 1/4" maybe 5/16" hose. the modulator on the transmission is hooked up, on the transmission anyway. I have looked everywhere under there and can't...

ok next onto the next mess, windshield wipers or blinkers? Windshield wipers: none existing right now they were removed when it was painted. I have the linkage and motor (not sure if it works) one wiper arm and half of the other%). no wiring through the windshield that I can find. Blinkers: I...

I have Toms H4 headlight kit (harness, relay's). my stock 74 wires have been hacked some. I have two wires coming in to the head light one green, one red and ran brown to ground. I think I hooked them up like the original headlights were, except the two reds for the hot in the new harness. here...

what is the standard size of a 9" pinion bearing? I see a couple of different sizes.

I am sick of these rubber lines that the po ran from the fuel pump to the fuel rail (96 mustang) splitting. from the quick glance it looks like there is just a hose clamp on the inlet to the fuel rail.%) I know hard lines would be the best but would like to be a little flexible. Braided fuel...

Well I am going to call this frame off Revell, I know I did put a lot of thought into it%) first I got the long block done, went with a pretty much stock 5.0 roller with a mild cam, and painted ford blue. I had the 3 speed tranny rebuilt while I was at it. next I installed the intake manifold, I...

Ok where are all the pics at, I am needing my fix;D

what are your thoughts on this one:-X still haven't figured out why you would paint an oil filter on a rebuilt engine%)

which part do i need to keep my sterring colum from pulling up. i have to push it down to shift gears http://broncograveyard.com/dia/6/clmdia.jpg

had to go across town to do an inspection. chased down a sweet stock yellow orginal 71 sport. very nice guy he said he goes by batman on here. sorry no pics:(