Search results

I have Issues: (all are in great to perfect shape) #9, 17, 19, 20, 24, 27, 49, 51 Looking for Issues: #1 %), 2, 3, 4, 5, 7, 8, 12 Let me know if you have any extras around. Will also purchase! Chuck

I am ever changing my mind with the current state of my bronco...keep it...sell it...oh you can't sell it...sell it...push it out into traffic...Really, I am trying to focus and figure out what I actually want out of the bronco and go from there. I have always wanted to make my bronco capable...

'77 Bronco with a good body (does need some panels replaced) and por-15'd frame. I pulled the body off the frame and put alot of work into cleaning it up. The body needs some work but is a great start and better than most that I have seen. This bronco has a James Duff 3.5" suspension lift and...

I have a complete kit to swap a ZF 5-speed into your Bronco (minus driveshafts), including the transmission :o. Includes: Brand New 50oz Flywheel from BroncoGraveyard Brand New LUK Clutch Kit Brand New BCB Hydraulic Throwout Bearing Brand New BCB Stainless Master Cylinder Line Brand New BCB ZF...

I have a new in the box Centech complete re-wire harness kit with the Centech ignition switch adapter kit. $400 + shipping. Chuck

I have a very nice bulkhead.....$100 Nice grille off a '77....$150 Prices are firm and I would prefer not to ship. Local will have priority. Send me your email if you would like pictures. Chuck

I have some new, never used (although I am the 2nd owner) stuff from Wild Horses. I have decided to go a different direction and it will be awhile before I get back to work on the bronco, so I don't want this stuff sitting around. Can send pictures if you would like to see them. Shipping on...

Looking for some cheap $20-$25 door hinges. Don't need to be in perfect shape, just enough to hang the doors with. My project is going to have to be put on hold for awhile and I want to get the doors off the floor and out of the way (of course I sold all the other hinges I already had %)). Chuck

http://www.wildhorses4x4.com/product/Body_Lift_Kit_2in/Bronco_Body_Lifts Wild Horses deluxe 2" body lift. New still in box. Have decided to go with a 1" instead. $130 shipped. Firm.

Anyone have a cheap drop pitman arm for a '77 PS box? Trying to decide if I should buy the Wild Horses drop or not. Chuck

-Looking for some stock exhaust manifolds (changed my mind again on going with headers). (Found a Pair) -Looking for a stock carb. I guess its a Motorcraft 2100? Will rebuild it, so it doesn't have to be in perfect shape. (Found One) -Looking for a new pair of stock "Power by Ford" valve...

Well, I have made it VERY far on my swap %). Pulled the stock timing gear cover off and realized that this "washer" (don't know what to call it) interferes with the explorer timing cover. It interferes with two of the bolt holes in the middle of the cover, that are used to attach the water...

Ordered some extreme motor mounts to replace the stock ones. Prior to pulling the motor to swap the motor mounts, I had installed/mocked up the ZF with BC's crossmember. With the stock mounts and the ZF bolted up to the motor, the bolt holes in the ZF crossmember lined right up. Now, with the...

Looking to see if anyone has some nice uncut front fenders before I buy some from Toms next week. Let me know what you got. Thanks! Chuck

My brother-in-law made this shirt for me. I thought it came out pretty neat! The bronco on the shirt is the one I rolled last year, I suppose it is somewhat of a memorial :p. (front and back pics) Chuck

Anyone installed the Advance Adapters ZF to Dana-20 Kit? I have ordered the kit and am hoping to install it this weekend. Any tips, tricks, or advice? Seems like it will be pretty straight forward, but figured I would check. Hopefully this will be one of those rare times that I can...

First off, I have a '77 bronco in which the steering has been converted from the Inverted-Y to the earlier style steering. If I remember correctly, this makes a difference in what backspacing you are limited to with wheels. I have some 15x7 wheels with 3.75" backspacing. The wheels clear the...

Figured this was worth a shot. This list is for the project I am currently working on and looking to pick up some parts as I go. Maybe someone bought some parts and decided to go a different direction. Can't buy the parts all at once, but looking to see what is out there. ;D :p (Probably...

Did a search looking for some information, but didn't have much luck. Are there specific measurements on where the x-member should be located on the frame? When bolted to the ZF itself, it seems there is only one location that it can be in the horizontal direction...so, is it just a matter of...

What T.O. bearing did you use when installing the ZF? What else is needed inside the bellhousing before installation? I'm trying to install one now and am alittle confused. I have the line running into the ZF for the T.O. bearing (assuming that is what it is for)? Um, help ?:? Chuck