Search results

Bittersweet Day! I reserved my 2 door Badlands in March of '21 from Chapman Ford in Horsham, PA with a new reservation after my local dealer in Mass converted my original one into an order even though I didn't ask them to. Chapman had a killer deal so I bailed and went with them. I was...

Good Morning, I have an unlifted 76 w/C4 auto trans and looking to put a Holley 4548 4bbl on a 92 Lincoln 5.0 HO motor that I have waiting in the wings. Does anyone know what intakes will fit under the hood? There's a local EB'er w/a Edelbrock Torker II (Model 5021) but we're unsure if it will...

Hi Gang, I've had an issue with valves sticking after getting my '76(302, dual exhaust, auto tranny)back on the road last year after having sat outside under a tarp for @ 10 years. Last year I removed the gas tanks and cleaned them. New fuel senders, pump and filters. It's ran a little rough...

Hi gang, looking for a wiper delay switch for my '76. The one I have works intermittently and I need to replace it. Thanks, David

So the cable on my relay/solenoid to the starter played smoochy with the fins on the alternator which wore through the coating and ate 3/4 of the cable. It remained in contact with the alternator so when the kids tried to start it, they said it made some clicky noise then nothing. I swapped...

Good Morning, One of the disc brake caliper slide retaining bolts was broken off in the caliper the bracket. I drilled it out and tried to refresh the threads with a standard tap but one of the segments on the tap end broke off. I assume it's because the bracket and maybe the bolt were hardened...

Having a tough time here with a new set of Timken inner wheel bearings, Set 37 on my '76 D44 w/stock front disc brakes. New bearings from Bronco vendor. Passenger side went on fine but on the drivers side the inner bearing got hung up on the spindle. Tried to gently persuade the assembly with...

Looking to take the Bronco out of mothballs for summer. Carbed 302 w/dual exhaust setup using JD long tube headers w/bullet cats on 2.25" system. The mufflers and tailpipes are shot and I have a line on a couple 2.5" mufflers from a '90 Mustang for short money. Any issues stepping up after the...

I am looking for a stock front bench seat for my EB. If not I'd appreciate recommendations for non stock applications that would work. I've heard mid '60's Falcons are a match. True? Others? Thanks, David