Search results

I am looking for jack, lug wrench and hold downs for jack & wrench for 72 Bronco ( Does not need to be a 72 but it needs to be complete and opperable). Thanks, Steve

I have install a new turn signal switch. Following a turn the signal does not "cancel" itself. I assume I forgot a part or assembled it wrong is there a drawing online I can refer to? or can anyone tell me what this could be. I got the switch from bronco graveyard but it looks the same as any of...

I have just done a disk break convesion to 76 chevy spindals & callipers. I also install new master cylinder, all new lines & rear wheel cylinders. The only thing I did not replace was the porportioning valve but that seems to be "operational". My problem is dispite bleeding the breaks 3 times...

I looking for a spare tire hanger for a 72 Bronco. I have everything for the spare rack except the "Y" shaped metal piece that hangs on the rack that the tire actually hangs on. I am also looking for the jack, handle and lug wrench and the hold down brackets for the jack & handle. The spare...

This may be a silly question but I am completing a frame off restoration of a 72 Bronco and I can't get the breaks bleed. I have coverted to disks in the front('76 Chevy), new wheel cylinders in the rear , new master cylinder and all new break lines. The equalizing valve is used but seems to...

I looking for a spare tire hanger for a 72 Bronco. I have everything for the spare rack except the "Y" shaped metal piece that hangs on the rack that the tire actually hangs on. I am also looking for the jack, handle and lug wrench and the hold down brackets for the jack & handle. Steve

I am nearly done with a frame off 72 restoration and I have just started the beast for the first time in 2 years and this is what I see.h It starts in in park( I think) but the rig wants to move backwards so I believe that the neutral safety switch may need adjusting. Can this be, the only...

We are getting close to the end of our frame off 72 project and we just put the body on and I need to install the shroud. I'm running a 302 and a new BC three pass radiator. Someone before me put on a 6 blade fan and the clearance between the fan and the radiator is approximatly 1". Is this...

I order the parts for the Chevy Blower from Napa and I wondering if I got the right motor. I ordered the following (crossed the numbers to NAPA) Use the motor & cage from a 78 1/2 ton chevy pickup. Carquest part number #208971 (motor) & #209109 (cage). The motor I received looks great but it...

I'm looking for front seats for our 72 Bronco "frame off" restoration project. The type of seats we are looking for are: New or used w/ Mounting brackets High back Three point seat belts. Fold foward for easy entry into back seat. We are hoping to keep this cost to less than $750 for both...

Thanks, Where can I find out about the Chevy upgrade?

-------------------------------------------------------------------------------- Where can I find a heater fan cage for a '72 bronco? The motor is fine but the plastic blower "cage" is trash.

Where can I find a heater fan cage for a '72 bronco? The motor is fine but the plastic blower "cage" is trash.

When I go my 72 Bronco it was missing the linkage that goes from the C4 Transmission to the Carb. Does any one know where I can find this rod?

Yea Bronx how do you like the lizardskin? What do you think of it as an undercoating. The suppor folks at lizardskin say most of there customers use it as an under coat as well as on the interior. I've decided to try a test piece on the Lizardskin covered with Durabak to see what I think, I'll...

The POR-15 with LizardSkin undercoat is the undercoat plan. I am concidering POR-15 followed by lizardskin and followed by Durabak for the interior. I've spoken to both manufactures an they agree it should work (of course no gaarantees). It breaks down to an additional $180 for additional...

LizardSkin & Durabak The POR-15 with LizardSkin undercoat is an excellent idea. I am concidering POR-15 followed by lizardskin and followed by Durabak for the interior. I'v spoken to both manufactures an they agree it should work (of course no gaarantees). It breaks down to an additional $180...

Lizard Skin looks interesting The Lizard Skin looks interesting put I don't think its as durable as I need. The idea is for a durable "carpet substitute" I'm certain that the LinX would be great and the more I think about it the sound should be fine but the heat may be bad. Is there any one...

I'm a newbe an doing a frame off resto of a '72 I am concidering using LinX on the entire inside tub and painting the entier under carrage with POR-15. I'm sure this would be durable but I concerned about noise and heat. With no padding and carpet I'm afraid that both could get a little...

We are about to sand blast the frame and axels to be followed by a durable paint. Plan on a satin vs a gloss and I see two or three choices. POR-15 Eastwood Chassis Black Eastwood Extreem Chassis Black (introduced last summer) Recommendations! Thanks in advance, Steve