Search results

Quick shipping, every thing looks like new. Well worth the price!

351 EFI w hydroboost

Thanks for the info!

Trying to search for "ZF"...as in tranny. There are many post with ZF in the tittle or body...but the search function does not pick this up. Any guidance? Thanks

I purchase a pressure bleeder from Motive. One of the options comes with 3 univeral adapters. Works great http://www.motiveproducts.com/

Excellent article for the rebuild http://4x4.forensick.net/88bronco/images/sbr/index.htm

http://shop.oreillyauto.com/ProductDetail.aspx?MfrCode=SFW&MfrPartNumber=710&PartType=267&PTSet=A

Metric 9.8 M7

Excellent link explaining Ford Flywheels and Flexplates....answered my Q http://www.rowand.net/shop/tech/FordFlywheeslAndFlexplates.htm Looks like 50 oz., 164 tooth, 11 inch Alot of good info here on all sorts of stuff (main Page) http://www.rowand.net/Shop/Tech/

Any help on which 50 oz. flywheel to use with a ZF with a 92 EFI 5.0? How is the bell housing setup to interface with the starter? I have seen both the 164 or 157 tooth flywheel listed. I am assuming I could use a starter and flywheel from a 92 stang? Thanks for the help

As an FYI which maybe alot of people already know of..... You can go on the web to checker autoparts....If you know of a vechicle that has hydroboost plug that info in ..once you navigate to the part needed you can select "See all vehicles this product fits" this is what you get...

I just received this one...very nice. They are made by Bussmann and can be ordered in many different configurations. These are the same ones that painless in currently using

I am in the process of updating my harness for an EFI setup. You can get this one and open it up and cut the tin connector in half. The connector is one piece that serves all the fuses. This particular one only has six slots for fuses. By cutting the connector you isolate 2 fuse slots from the...

Just got the block from the machine shop 92 Mustang motor with computer and harness (A9L) Over time have purchased: GT40 Heads Mustang Cobra computer (X3M), Upper and lower intake ZF Tranny 35 tires Stang buddies steered me into building a Cobra motor because it had more torque and less...

It is a Currie bracket..along with the Currie axle..havent had the need to pull the tire to know. We'll see if currie sell a solo bracket. Thanks again

Good call Todd. it does look alike.. I'll be pulling the wheel off shortly. Bowsher..thought it was a stock bolt pattern.

I had looked at the Duff site..did not find any brackets that matched http://www.jamesduff.com/eb/discbrakes.html Thanks for the caliper ident. I was hoping on replacing the brackets rather than a buying new setup

Installed by P.O. The lower caliper mounting bolt backed off while wheeling, locked up the tire and tweeked the bracket and flange. Switched out the upper mounting bolt for the missing lower and limped back. Can anyone identify this setup including calipers (t-bird I think)? I have not been...

Don't see the mention of reverse outlets either on BC's. Good call Todd... did not think about a radiator shop

I'll find out shortly and report back