Community
Buy / Sell
James Duff Rust Bullet Sexton Offroad
Bronco Tech
Ford Bronco Parts - Classic Vintage Early Bronco Parts
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

Search results

  1. G

    Bronco Model (Trim Package)

    Get a Marti report and that should tell you everything you need to know.
  2. G

    Flywheel Question

    Its a 164 tooth flywheel (I counted to be sure), and its the original Ford C5AE flywheel. I went with the Luk 07-027 based on several threads here and several parts interchange lists. James, thanks for the insight, looks like you solved a couple of questions on this one thread.
  3. G

    Flywheel Question

    I talked with a local parts store/machine shop and he quickly told me "we don't do that, you cant get the balance right. Just buy a new flywheel". But I have seen several good machine shop videos that go through the math and ensure that the holes are centered and accurate. So I will call...
  4. G

    Flywheel Question

    I am working on my 75 and pulled the motor to replace distributor, intake, etc and decided that since the clutch needed replacing, engine removal was easier. I had ordered a Luk 07-027 clutch kit which is a diaphragm style, my current clutch is a 3-finger style so the flywheel won't take the...
  5. G

    Engine choice

    So I finally got around to pulling the engine after my engine fire up at Super Celebration back in '22. I was originally going to pull the engine, replace the distributor, intake and carb, new clutch and drop it back in but this thing is tired and leaking from everywhere, it was probably...
  6. G

    Distributor issue

    Last year during Super Celebration East, we had a small engine fire that burned down my distributor. Its taken a while to gather some parts but I am switching to a new 4 barrel intake, new carb and a new distributor. Right after I started tearing down the top of the engine, we got hit with a...
  7. G

    Super Celebration East April 19-22, 2023

    OK all you lucky ones who were able to attend... where's the pictures? We got hit with a tornado back in Jan and I broke my arm so couldn't make it this year. Let's see some pics!
  8. G

    What have you done to your Bronco today?

    So what are 351W rollers going for these days. I need to pick one up soon.
  9. G

    What's this weird doohickey reducing my ground clearance??

    Its a thingamabob, short for thingamarobert. :D
  10. G

    Short where do I turn

    Yes, clean all of your main connections and also check the voltage at the battery. You can have lights and such at 10 to 11 volts but that isn't enough to engage the starter/solenoid.
  11. G

    Intake and Carb

    I think I am ready to ditch the 2150 and 2bbl intake on my 75 and swap in a new intake and 4 bbl carb. So what are your recommendations? Loaded question, I know. Holley vs Edelbrock, and dual vs single plane intake. Are the Summit brand intakes and carbs any good? I am leaning toward the...
  12. G

    RockAuto package

    Well, the law of averages got me today. Got another RockAuto package today and no magnets. :cautious: :cautious:
  13. G

    RockAuto package

    Ordered a few parts from RockAuto with a couple being Bronco specific. So do they pay attention when they throw the magnets in the box? Maybe, I mean, what are the odds otherwise? I actually had 2 magnets in this order.
  14. G

    5.0 Explorers, what should I grab?

    Found 2 pretty clean and low mileage Explorers (both 2000) in the U-pull-it yard and I am gonna grab both 5.0 engines. One of them is an AWD so I was wondering if I should grab the transmission as well. Plan on getting all of the front serpentine setup from both. I don't think I will be using...
  15. G

    First time at Super Celebration

    When my wife got a ride with the folks in the new Bronco I said "they have to be OK people, they are in a Bronco". As she rode off with them it dawned on my that so was OJ! :oops: :oops::oops::oops::oops::oops:
  16. G

    First time at Super Celebration

    This was our first year at Super Celebration and wanted to share a bit of what we observed and learned. It was a great time even though we had some bumps along the way. Met a lot of great people and saw a ton of awesome Broncos. First, we needed to spend more time there so next year we may...
  17. G

    Made it to Townsend but need some help

    Getting tires put on now. Thanks hunter1
  18. G

    Made it to Townsend but need some help

    Rolled into Townsend this evening about 2.5 hours late. I have no idea how my trailer tires made it, got tread separation on at least 2 and don't trust the other 2 after a closer look. Can anyone recommend a good tire shop in Townsend or Maryville so I can get 4 new tires for the trip back on...
  19. G

    What have you done to your Bronco today?

    That's for when you need to do some touch up work, the paint code is in braille. 😁
  20. G

    My 77 Going To Paint

    Go to Kevin Marti at Marti Auto Works for the door tag/sticker. They reproduce them and they are very original looking. If I remember correctly, you just send them a copy of the current one. https://www.martiauto.com/
Top