Community
Buy / Sell
Bronco Tech
Fuel Tank Access Plate
3 Arm Wiper Setup
Fix Motor Mount
Roll Cage Braces
Throttle Body 65mm
Wheel Alignment
Heat Riser Replacement
Vent Window Repair
Center Console Mount
Straighten Bumper
Ford 6R80 6 spd
More Tech...
3 Arm Wiper Setup
Fix Motor Mount
Roll Cage Braces
Throttle Body 65mm
Wheel Alignment
Heat Riser Replacement
Vent Window Repair
Center Console Mount
Straighten Bumper
Ford 6R80 6 spd
More Tech...
-
Be EXTREMELY cautious if someone offers to buy your Bronco for more than your asking price and sight unseen. ESPECIALLY if the buyer is overseas. It's probably a scam.
Discuss it more here:
http://classicbroncos.com/forums/showthread.php?p=514932 -
Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!If you have problems registering or can't log into your account, please contact Admin.
AR 2020 OCBR Parts for Sale, Swap, Trade
- Thread starter sprdv1
- Start date
- Status
Banjer Picker
Bronco Guru
- Joined
- Sep 25, 2006
- Messages
- 1,405
Lance Ellis has a 23 Gallon Tank he’s wanting to sell. I’ll find out the price and get some pics
- Joined
- Oct 14, 2004
- Messages
- 5,001
Duff long tube headers, Flowmaster hushpower mufflers, complete exhaust. You would need gaskets and bolts for the collectors and a couple of hangers. The tailpipes stop short of the rear bumper. The pipe between the headers and mufflers have a up bend in them to clear the crossmember for duffs torque tamer, if you don't have that it doesn't matter, just an extra bend in the pipe.
Mufflers and pipe are 2.25"
The mufflers alone are over $100 each new, google it.
I'll take $125 for all of it and deliver to OCBR.
Mufflers and pipe are 2.25"
The mufflers alone are over $100 each new, google it.
I'll take $125 for all of it and deliver to OCBR.
Attachments
- Joined
- Oct 14, 2004
- Messages
- 5,001
4 stock alternators. The newest looking one I just pulled off doing an explorer swap. The other 3 were all working but have sitting on shelf for years.
$25 for all of them.
3G alternator - 160 amp - SOLD
I also just pulled this off doing an explorer swap. I bought this from Raaaay on this site several years ago, 10+, but it was still working fine when removed.
$50
$25 for all of them.
3G alternator - 160 amp - SOLD
I also just pulled this off doing an explorer swap. I bought this from Raaaay on this site several years ago, 10+, but it was still working fine when removed.
$50
Attachments
Last edited:
- Joined
- Oct 14, 2004
- Messages
- 5,001
Used stock radiator mounts - $10 - SOLD
Edit - found another set of stock radiator mounts - $10
Holley fuel pump - $40
Stock hubs (no springs) - $40 - SOLD
Windshield wiper motor - $5
wires are cut pretty short but it worked when removed
Steering Wheel - $10
Parchment seat belts, what you see in the pic - $20 - SOLD
4 degree radius arm bushings, new - $20 - SOLD
D20 rear output shaft - $20
Edit - found another set of stock radiator mounts - $10
Holley fuel pump - $40
Stock hubs (no springs) - $40 - SOLD
Windshield wiper motor - $5
wires are cut pretty short but it worked when removed
Steering Wheel - $10
Parchment seat belts, what you see in the pic - $20 - SOLD
4 degree radius arm bushings, new - $20 - SOLD
D20 rear output shaft - $20
Attachments
Last edited:
- Joined
- Oct 14, 2004
- Messages
- 5,001
Explorer PS/AC bracket, the piece that bolts on the drivers side. PS pump and pulley included. The return on the reservoir connected to the pump is broken off short but the extra good reservoir you see in the pic is included. - $60
Timing cover - $15
Timing cover with Tuff Stuff reversible water pump. I just removed this when switching to explorer setup, was working fine. - $35
Wildhorses Saginaw PS bracket - $20
28oz balancer with 4 bolt serp pulley - $25
28oz balancer with 4 bolt aluminum Vbelt pulley - $25
5 fan spacers of various sizes, see pic - $10 for all
Vbelt pulleys - 2 waterpump, Saginaw PS, 3 bolt balancer - $10 for all
Timing cover - $15
Timing cover with Tuff Stuff reversible water pump. I just removed this when switching to explorer setup, was working fine. - $35
Wildhorses Saginaw PS bracket - $20
28oz balancer with 4 bolt serp pulley - $25
28oz balancer with 4 bolt aluminum Vbelt pulley - $25
5 fan spacers of various sizes, see pic - $10 for all
Vbelt pulleys - 2 waterpump, Saginaw PS, 3 bolt balancer - $10 for all
Attachments
- Joined
- Oct 14, 2004
- Messages
- 5,001
2 stock radiators - $30 each
BOTH RADIATORS SOLD)
Both have connections for auto. Both good when removed. One was just removed in April when doing an explorer swap, the other has been sitting for a long time and would recommend flushing out before using. Not perfect but good radiators.
Radiator guard, new, came from Wildhorses - $15
7 blade stock fan with bolts and spacer - $40
6 blade fan with bolts and spacers - $25
Both of these recently removed doing an explorer swap.
BOTH RADIATORS SOLD)
Both have connections for auto. Both good when removed. One was just removed in April when doing an explorer swap, the other has been sitting for a long time and would recommend flushing out before using. Not perfect but good radiators.
Radiator guard, new, came from Wildhorses - $15
7 blade stock fan with bolts and spacer - $40
6 blade fan with bolts and spacers - $25
Both of these recently removed doing an explorer swap.
Attachments
Last edited:
- Joined
- Oct 14, 2004
- Messages
- 5,001
- Joined
- Oct 14, 2004
- Messages
- 5,001
Old school fiberglass rear flares - $30
Great shape but will need a little cleaning up, sanding, and painting.
These are not for clearing a large tire, the bronco they came off of (last pic) had 31 inch tires on 8" wide spoke wheels and they cleared fine with no lift.
Great shape but will need a little cleaning up, sanding, and painting.
These are not for clearing a large tire, the bronco they came off of (last pic) had 31 inch tires on 8" wide spoke wheels and they cleared fine with no lift.
Attachments
OP
OP
- Joined
- Mar 8, 2007
- Messages
- 81,996
OP
OP
- Joined
- Mar 8, 2007
- Messages
- 81,996
- Joined
- Oct 14, 2004
- Messages
- 5,001
Amazing what you can find yourself tripping over after years of tinkering on these things
OP
OP
- Joined
- Mar 8, 2007
- Messages
- 81,996
lol, yes sir I don't blame him
- Joined
- Oct 14, 2004
- Messages
- 5,001
Autoline rebuilt 2V carb, electric choke. (1st pic)I bought this last year, could not get it to idle to suit me an with OCBR closing in I replaced it with a Holley 2V and eventually switched to EFI. Installed, drove locally on my street and removed. - $50
2v parts carburetor. (2nd & 3rd pic)This was torn down and left in carburetor cleaner too long (that's my opinion). It was put back together with a kit and had problems. Would be for parts or possibly rebuild for somebody else - $10
Holley 670TA with electric choke. Comes with jet kit ($65 value), extra vacuum secondary springs, squiters, extra valve. - $100
This came off my 393 when switching to fuel injection, has been sitting a while.
2v parts carburetor. (2nd & 3rd pic)This was torn down and left in carburetor cleaner too long (that's my opinion). It was put back together with a kit and had problems. Would be for parts or possibly rebuild for somebody else - $10
Holley 670TA with electric choke. Comes with jet kit ($65 value), extra vacuum secondary springs, squiters, extra valve. - $100
This came off my 393 when switching to fuel injection, has been sitting a while.
Attachments
- Joined
- Oct 14, 2004
- Messages
- 5,001
2 fuel selector valves - 1 is new with fittings - $25
2nd one is valve only, looks new but may have been used - $15
Moroso 65385 fuel neck return kit for adding EFI - $20 - SOLD
Missing clamps
C4 Shifter ext for 2" body lift - Duff part #2109 - $10 - SOLD
Hardened crosspin for 9" mini spool - $5
2 chrome gas caps - vented-not vented, I have no idea - $5 total for both - SOLD
2nd one is valve only, looks new but may have been used - $15
Moroso 65385 fuel neck return kit for adding EFI - $20 - SOLD
Missing clamps
C4 Shifter ext for 2" body lift - Duff part #2109 - $10 - SOLD
Hardened crosspin for 9" mini spool - $5
2 chrome gas caps - vented-not vented, I have no idea - $5 total for both - SOLD
Attachments
Last edited:
- Joined
- Oct 14, 2004
- Messages
- 5,001
March Performance 351W billet aluminum alternator bracket / adjuster
This is $100+ new. All bolts and spacers included. 1 corner was trimmed for clearance when I used it. - $20
ATV winch mount - $10 - SOLD
2 Thermostat housings, both pulled off since OCBR last year, 1 chrome, the other is stock style with bung in top. $5 each
BOTH SOLD
New radius arm bushings - $10 - SOLD
Coils - NAPA $5 each - SOLD
Petronix Flame Thrower - $10 - SOLD
5 voltage regulators - All 5 for $10
1 of them was recently taken off when switching to explorer serp, the others are all new as far as I know.
This is $100+ new. All bolts and spacers included. 1 corner was trimmed for clearance when I used it. - $20
ATV winch mount - $10 - SOLD
2 Thermostat housings, both pulled off since OCBR last year, 1 chrome, the other is stock style with bung in top. $5 each
BOTH SOLD
New radius arm bushings - $10 - SOLD
Coils - NAPA $5 each - SOLD
Petronix Flame Thrower - $10 - SOLD
5 voltage regulators - All 5 for $10
1 of them was recently taken off when switching to explorer serp, the others are all new as far as I know.
Attachments
Last edited:
- Joined
- Oct 14, 2004
- Messages
- 5,001
- Status
