1350 high angle driveshaft

[driveshafter]

1350 highangle drivelines $375.00 each $350.00 each for two with over 20 yrs exp we bleed 4x4. 1330 1310 high angle and stock available repairs re tubes parts etc....cal 602 997-0906

 

[Buldozer]

How does your angle capability compare to Jesse's over at High Angle Driveline? As I recall, his are good for about 42 degrees.

 

[driveshafter]

angle

im getting about 45 max with 2" tubing the 1410s are about 50 with 1350-1410 changeover ujoints

 

[reynard101]

Thanks driveshafter. Got my 1350 High Angle shafts today. They look good.

 

[driveshafter]

driveshafts

thank you for the buisness i hope there more than you expected to get

 

[driveshafter]

monday new year

driveshafter here saying hope this year is well for all

 

[TrackerJBain]

1350 cv?

So are these 1350 cv's or just strait 1350 u joint to yoke? I'm running 1350 cv and killing the center pin, running at 22.5 degrees and limiting out at 35 degrees. I'm looking for a stronger option. Thanks in advance.

 

[driveshafter]

So are these 1350 cv's or just strait 1350 u joint to yoke? I'm running 1350 cv and killing the center pin, running at 22.5 degrees and limiting out at 35 degrees. I'm looking for a stronger option. Thanks in advance.

no sir there 1350 cv with the stops grinded out as much as the configuration applies we max out the angle of the cv we also beef up the tubing and use the longest slip n stub we can fins still saving the customer
money we also drill and tap the flange for a greese fitting for lubrication spicer ujointd new all the wa through also our drive shafts are straighter than a arrow with runout at pin and stub at less than ,003 this is old school and before balencers were more abundant the way they made sure the shaft was right and 22 degrees shouldn't make the ball stud where out so quick once the ball stud pin is ,005 or more from .500 inches youre screwed It just wheres out quickly to much chater call me at 602 997-0906 at 9:00- 9:30 I should be caught up with my parts order an be able to talk

 

[driveshafter]

drive shaft

call me at work if any one needs help with driveshaft vibes

 

[mp]

Thanks for taking the time to answer my questions today. Looking forward to my new driveshaft.

 

[SpareParts]

Two of your driveshafts are on the way to my customer/friends house as we speak. Looking forward to ordering one from you as well.

 

[driveshafter]

driveshaft

delivery carriers suck

 

[SpareParts]

Hope you get that figured out!

 

[driveshafter]

deli8very

we got it under control ill tell you what never hire a 19 year old secratery they think they know every thing and when you tell them something it goes in one ear and out the other

 

[SpareParts]

It happens...

 

[driveshafter]

were working on setting up a shipping carier any help out there

 

[SpareParts]

Fed Ex is how we ship our rollcages.

 

[sprdv1]

What's the difference in yours vs say one like this from Duffs?

http://www.dufftuff.com/Spicer_Rear_Driveshaft_1970_77_Bronco_p/3812.htm

 

[driveshafter]

driveshafts

well i used to build duffs driven toms broncos drivelines so i upgrade to spicer ujoints i use 120 dom tubing and i squeze as much as i can out of the stops to max out the angles

 

[sprdv1]

120 dom vs what do they use?

I thought the duff's used spicer joints from what I read? Sorry for all the questions Just about to order replacement for rear, I used duff up front

thank u sir