• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

1966 Cowl to Hood Seal

eaglenest66

Contributor
Bronco Guru
Joined
Sep 14, 2006
Messages
1,255
Looking for a little bit help here! Input mainly! After producing the early driver side air box seal, I managed to also have produced the square stock seal that sits atop the cowl. Mine measures 56 1/4" from end to end and is positioned straight across at 10 3/4" back from the front cowl lip. Pictures attached are of my original early '66 and a former original owner's later '66.

If anyone with an original '66, please post the length and measurement back from the cowl lip of your seal. It would also be appreciated if you could verify whether your's is an early (August thru October '65) production rig or later.

Please post pics if you have them. I will be making this seal available soon. thanks, tim
 

Attachments

  • IMG_2756.jpg
    IMG_2756.jpg
    75.6 KB · Views: 96
  • IMG_2757.jpg
    IMG_2757.jpg
    50.1 KB · Views: 90
  • IMG_0008.jpg
    IMG_0008.jpg
    130.4 KB · Views: 94

rmiller747

Bronco Guru
Joined
May 11, 2009
Messages
1,102
Loc.
Highland, Mi
Hi Tim

I will post pics and measurements of my original tonight when i get home. Mine is in decent condition.

Sept. 65. U13fl752345
 

Attachments

  • IMAGE_3074.jpg
    IMAGE_3074.jpg
    130.6 KB · Views: 75

mp

Bronco Guru
Joined
Dec 22, 2001
Messages
2,914
Loc.
Austin, TX
I can measure mine and post photos when I get home from work.

And I will need one.
 
OP
OP
eaglenest66

eaglenest66

Contributor
Bronco Guru
Joined
Sep 14, 2006
Messages
1,255
Can't wait to see your roadster next weekend Rich. Heard it is a little gem!
 

66broncofan

Contributor
Sr. Member
Joined
May 20, 2003
Messages
630
Hi Tim, I can't wait to purchase, wish I could help with the measurement. Let us know when they are ready.
Steve
 

rmiller747

Bronco Guru
Joined
May 11, 2009
Messages
1,102
Loc.
Highland, Mi
Well appears quality control was out the window a bit.

Mine is 55-3/8" long. Shorter and if you see the pics it is shorter on the driver side. I thought at first it was cut but not sure if it shrunk or was cut. If it was cut is was cut clean as it is a nice smooth factory looking cut. Not sure%)


same measurement back - 10-3/4"


Pics below.

Cant wait to see ya Tim. Its been a bit. Hope we have nice weather. It snowed today...WTF. :mad:
 

Attachments

  • IMG_8374.jpg
    IMG_8374.jpg
    55.8 KB · Views: 33
  • IMG_8375.jpg
    IMG_8375.jpg
    59.4 KB · Views: 31
Top