Bronco-Brian
Full Member
City:
Lake Oswego, OR
Price: $ 1350
Price: $ 1350
I’ve got a front bench seat to sell that is fully reupholstered matching a 1966 factory Silver w/ Matchstick pattern using Ford oem vinyl from SMS. The seat is from an early sixties Ford Falcon. It is the exact same width as bronco with the same type of slider tracks. Bronco style mounting tabs were welded on the tracks that look factory and use the factory floor holes. The bottom cushion is a little thicker and sits about an inch up from bronco seat height, and the back is about 2 inches higher than bronco but is the same angle and thickness. There are 2 bolts the lock the back to the bottom so it doesn't fold forward. Seat adjust moves just like bronco using the driver's side lever. Hinge covers are falcon. I have the seat installed in my 1966 U14 and it fits just fine and looks original but with added comfort. Upholstery work was performed by a local professional upholstery shop and sewn to match ford details resulting in as close to oem as you can get.
Prefer pick-up, but may consider shipping - that will likely require freight due to size and weight.
Prefer pick-up, but may consider shipping - that will likely require freight due to size and weight.











