1967 289 V8 mechanical fuel pump w/ vacuum wipers? (pic)

[311unity13b]

I've tried to search without concrete results. I have a '67 289 V8 with the original vacuum wipers. My fuel pump has been leaking and I can't seem to find a gasket kit to repair it. I also can't seem to find a new/rebuilt pump that lists that it's for a V8. All the ones that I've found look the same as the one I have but list for the 6 cyl. Will the one for the 6 cyl work for my V8 engine? I don't really want to convert to electric wipers as I want to keep it as stock as possible. Thanks y'all! -Zach

 

[Ovalis]

Try looking on ebay for one.

 

[vintage bronco]

Give Robert D wolf a ring here is his contact info :
Email : Robert@htfparts.com
Phone : 1-828-682-2653

 

[jerry]

Zach,

Hope this helps you out. (Good tip, Ovalis!):

http://www.ebay.com/itm/1966-1969-NOS-Ford-Bronco-289-Dual-Action-Fuel-Pump-With-Vacuum-M4251-/400650682221?_trksid=p2054897.l4275

 

[jerry]

The "M4251" appears to be an obsolete Carter part number.

If eBay doesn't pan out:

While I don't see one specifically listed for a 289, you might try these guys:

http://cgfordparts.com/wwwsectionfiles/cg_cat2_fuel_system_fuel_pump.html

 

[311unity13b]

Thanks guys! That ebay one looks good.

 

[pcf_mark]

Delco Nick member on here probably has a used one.

 

[thegreatjustino]

For some strange reason the 6-cyl is the only readily available one. I've heard a few times that your best bet for the V8 one is finding someone to rebuild your existing one. I have no idea who'd rebuild a fuel pump, but someone out there must do it.

 

[jckkys]

I have one your welcome to have for the shipping charges. It shouldn't be too bad. It only weighs about 3 lbs. This one is from a '68 and worked without leaking. Just PM me with your address. Someone must have rebuilding kits for these.

 

[311unity13b]

right on! thanks guys. jckkys, you have a PM