DonH
Sr. Member
City:
MONTESANO
Price: $ 32000
Price: $ 32000
This Bronco moved on its own power today sence 1978. What a great feeling getting a two year project on the road for the first time.
I have put rattle can primer to stop any rust from comming back from my work. I am not a body and paint person. This Bronco is very solid and will last for many years as is or detailed and painted. I have had little interest on the sale here and may look at aucttions. From what I have seen I have been asking a reasonable price of 32k when detailed and painted this should be doubled.
I worked alone on this prroject for two years. I am 83 years old and have done this twice and have fulfilled my desires and have to sell. At 32K there is little profet. As with most all Classic Bronco owners this Bronco will never be completly completed. Just look at whats out there and we just have to do that and if you are like me the only thing stoping us is you have to look over your shoulder at the War department for funding.
A 1967 U15 Bronco Sport that has not been on the road sence 1978. It appears that it first appeared in the Lake Tahoe CA area in the Late sixties and seventies. The last year it was regestered was 1978. It had engine problems and sit for years. It was given to his grandson that was in the Army. It was then brought to WA and set for years. Late 2019 and early 2020 it was stripped and engine sent to a shop in Olmpia WA and completly rebuilt. Heads were redone with new valves seats and springs for use of lead free gas. Block was bored .030 over then balanced for a C4 automatic transmission. The project became overwelming with the cost and amount of work required of doing a rebuild and was sold on eBay to me the high bidder. It had a fair amount of rust in the usal places that I have repaired or replaced. Now it has Zero miles on the rebuild. I am still working on the little details. This has been a two year project, I love it but because of my age I must let it go. You could be the first to drive it in a couple weeks.
VIN U15NLA48188
A few of the up grades.
Shop built 289 bored and balanced with
New valves and seats for todays gas.
Mild solid lifter cam
Electric fuel pump
Edelbrock Peformance package.
NEW Holley 0-1850 4160 600 cfm polished four barrel carb.
Long tube ss headers with dual exhaust.
Three core Aluminum radiator
New Alum water pump
New one wire alternator
New heater core and heater rebuild
HEI ignition system
8 mm spark wires
C4 automatic transmission with a Winters shifter
New leather fold down seats with both side arm rest plus fold down head rest.
Power steering with New power steering pump
Power disc brakes, front and rear.
Parking brake works with rear disc brakes
New dash and gauges
New platic glove box.
Led head lights front and LED tail lights rear.
New gas tank, hoses and sender.
New front and rear bumpers with 2 inch tow hitch.
21 circuit wire harness.
One Inch body lift
New front axle bushings.
New front hubs.
Raptor floor liner.
New windsheild
Install new window glass guildes both doors and new driver side glass.
New door seals
New front and rebuilt rear drivelines.
New shocks front and rear.
New 15x31 inch tires on black powder coated steel wheels.
Spare tire carrier with matching wheel and new tire.
1967 Ford Shop Manual plus records.
Matching Body and Frame VIN
WASP inspected
Title avalible
I have put rattle can primer to stop any rust from comming back from my work. I am not a body and paint person. This Bronco is very solid and will last for many years as is or detailed and painted. I have had little interest on the sale here and may look at aucttions. From what I have seen I have been asking a reasonable price of 32k when detailed and painted this should be doubled.
I worked alone on this prroject for two years. I am 83 years old and have done this twice and have fulfilled my desires and have to sell. At 32K there is little profet. As with most all Classic Bronco owners this Bronco will never be completly completed. Just look at whats out there and we just have to do that and if you are like me the only thing stoping us is you have to look over your shoulder at the War department for funding.
A 1967 U15 Bronco Sport that has not been on the road sence 1978. It appears that it first appeared in the Lake Tahoe CA area in the Late sixties and seventies. The last year it was regestered was 1978. It had engine problems and sit for years. It was given to his grandson that was in the Army. It was then brought to WA and set for years. Late 2019 and early 2020 it was stripped and engine sent to a shop in Olmpia WA and completly rebuilt. Heads were redone with new valves seats and springs for use of lead free gas. Block was bored .030 over then balanced for a C4 automatic transmission. The project became overwelming with the cost and amount of work required of doing a rebuild and was sold on eBay to me the high bidder. It had a fair amount of rust in the usal places that I have repaired or replaced. Now it has Zero miles on the rebuild. I am still working on the little details. This has been a two year project, I love it but because of my age I must let it go. You could be the first to drive it in a couple weeks.
VIN U15NLA48188
A few of the up grades.
Shop built 289 bored and balanced with
New valves and seats for todays gas.
Mild solid lifter cam
Electric fuel pump
Edelbrock Peformance package.
NEW Holley 0-1850 4160 600 cfm polished four barrel carb.
Long tube ss headers with dual exhaust.
Three core Aluminum radiator
New Alum water pump
New one wire alternator
New heater core and heater rebuild
HEI ignition system
8 mm spark wires
C4 automatic transmission with a Winters shifter
New leather fold down seats with both side arm rest plus fold down head rest.
Power steering with New power steering pump
Power disc brakes, front and rear.
Parking brake works with rear disc brakes
New dash and gauges
New platic glove box.
Led head lights front and LED tail lights rear.
New gas tank, hoses and sender.
New front and rear bumpers with 2 inch tow hitch.
21 circuit wire harness.
One Inch body lift
New front axle bushings.
New front hubs.
Raptor floor liner.
New windsheild
Install new window glass guildes both doors and new driver side glass.
New door seals
New front and rebuilt rear drivelines.
New shocks front and rear.
New 15x31 inch tires on black powder coated steel wheels.
Spare tire carrier with matching wheel and new tire.
1967 Ford Shop Manual plus records.
Matching Body and Frame VIN
WASP inspected
Title avalible
Attachments
Last edited:
