I have a tub left over from parting out my 69 that I am selling. I bought it to replace the basket case tub I had. It had been sandblasted by the PO and then left outside here in Arizona so had some flash rust (hence the color). It had some rust through in the passenger striker post and the floors so I replaced those with all new metal. It was a duel tank tub so I put in some flush motorcycle filler doors, cut the rockers and started working on narrowing (4.5") and stretching (13") the rear wheel tubs (this part not complete only one side started).
I considered trying to finish the stretch and narrow of the wheel tubs and primering before selling, but my time is very limited and funds even more limited. Also someone may not want the stretch and narrowed wheel tubs so it is easily able to be put back to a stock wheel tub if desired. I scrubbed the tub down with POR15 Marine clean and soaked it in POR15 Metal ready (hence the ugly color - last pic). I have about a grand into it, a little more time and primer and it would be ready for finishing.
Rotisserie already sold
Pics can be seen HERE
I considered trying to finish the stretch and narrow of the wheel tubs and primering before selling, but my time is very limited and funds even more limited. Also someone may not want the stretch and narrowed wheel tubs so it is easily able to be put back to a stock wheel tub if desired. I scrubbed the tub down with POR15 Marine clean and soaked it in POR15 Metal ready (hence the ugly color - last pic). I have about a grand into it, a little more time and primer and it would be ready for finishing.
Rotisserie already sold
Pics can be seen HERE
Attachments
Last edited:
I am moving and have already moved this thing 4 times, don't really want to move it again. You know you want it 
