1972 FORD BRONCO
- Professionally Built, Blue Printed and Balanced 351 Windsor with only about 6000 miles on it. (Very Strong and Fast)
- Turbo City Fuel Injection
- Edelbrock Performer RPM Package (Cam, Intake Manifold, and Lifters)
- Heads have larger intake and exhaust valves, double valve springs, chrome moly push rods and Crane roller rockers.
- The block is bored 30 over with 9 to 1 compression.
- Equal Length Shorty Headers with Thermo Coat
- MSD Distributor
- MSD Off Road Coil
- Two 2.5” exhaust from the headers, Flowmaster mufflers
- 1998 Ford Explorer Serpentine Belt system and accessories.
- High output alternator with a 100 amp circuit breaker.
- Ron Davis Aluminum Double Pass Radiator with auxiliary electric fan
- Modified C4 Transmission (built by Redneck Performance)
- Full manual shift
- Reverse shift pattern
- Rollerized gearset
- Herdened input shaft
- Reinforced forward drum
- Billet servo
- High performance frictions
- Deep pan
-Tight stall for rockcrawling
- External Transmission Cooler with thermostat activated fan
- B&M shifter with reverse shift pattern plate
- Dana 20 Transfer Case with Twin Stick
- Wild Horses 4X4 Extreme Dana 20 output shaft system
- Front and Rear Extreme Duty Long Travel Drive Shafts
- Dana 44 Front Diff with 5.13 gears and a Detroit Tru Trac
- 4340 Chrome Moly Axles
- Super Joint axle joints
- CTM U-Joints
- Front Disc Brakes with Drill Rotors
- Warn Premium Locking Hubs
- Chrome Moly Tie Rods and Drag Link with Heavy Duty Rod Ends
- Ram Assisted Power Steering with External Fluid Cooler
- 5.5” Lift Wild Horses Front Coils
- Fox 14” Travel Shocks with reservoirs and custom shock hoops
- Power Brakes
- The Air Conditioner Pump is converted to an Air Compressor with pressure cut off
- Heavy Duty 9” Housing with gussets
- 5.13 gears and a Detroit Locker
- Billet Steel 1350 yoke
- Yoke guard
- 31 Spline Superior Axles
- 5.5” Lift Deaver Leaf Springs with Wild Horses Extreme Leaf Plates and U Bolts
- 12” Travel Fox Shocks with reservoirs
- Extreme travel traction bars
- 1.5" Aluminum Wheel Spacers at all four wheels (gives the Bronco a wider wheel base)
- The Frame is Powder Coated
- The Tub has a Roll On bed liner applied to the bottom
- The outside and inside are sprayed with Red Vortex Bed Liner (Absolutely Rust Free)
- Protofab Front Plate Style Bumper powder coated black
- H4 Headlights
- Plate Style Rear Bumper with Tire and Cooler Swing Outs
- Custom Made Low Profile Rock Sliders with Nerf bars in place of the stock rockers
- Gorilla Warflares (the wheel openings were widend roughly 3")
- Rear Storage Tool Box
- Six Point Family Cage that is tied to the frame in four spots and powder coated black. (Cage will fit under a soft top. Top not included.)
-Hi-lift jack mount
- Aluminum roof
- Stainless Steel Dash
- Auto Meter Gauges
- Grant Steering Wheel
- B&M Shifter
- Tuffy Security Console
- C.D. player
- 280 watt amplifier
- 4 Sony Speakers (2 6” round and 2 6x9)
- Beard Suspension Seats up front
- PRP Suspension Bench Seat with 4 point Harnesses in Rear
- C.B.
- 2 Stainless Steel Off Road Lights
- 6 Rock Lights
- 38 X 12.50 X 15 Super Swamper TSL SX tires (spare is brand new, never been rolled on)
- 15 x 10 Weld “Out Back” style aluminum wheels
- 24 Gallon B.C. Broncos Gas Tank
- Warn 9500ti Winch
That’s all I can think of right now. It should get you started.
Located in Amarillo, Texas. PM me for email or phone number
Asking $16,500.00
- Professionally Built, Blue Printed and Balanced 351 Windsor with only about 6000 miles on it. (Very Strong and Fast)
- Turbo City Fuel Injection
- Edelbrock Performer RPM Package (Cam, Intake Manifold, and Lifters)
- Heads have larger intake and exhaust valves, double valve springs, chrome moly push rods and Crane roller rockers.
- The block is bored 30 over with 9 to 1 compression.
- Equal Length Shorty Headers with Thermo Coat
- MSD Distributor
- MSD Off Road Coil
- Two 2.5” exhaust from the headers, Flowmaster mufflers
- 1998 Ford Explorer Serpentine Belt system and accessories.
- High output alternator with a 100 amp circuit breaker.
- Ron Davis Aluminum Double Pass Radiator with auxiliary electric fan
- Modified C4 Transmission (built by Redneck Performance)
- Full manual shift
- Reverse shift pattern
- Rollerized gearset
- Herdened input shaft
- Reinforced forward drum
- Billet servo
- High performance frictions
- Deep pan
-Tight stall for rockcrawling
- External Transmission Cooler with thermostat activated fan
- B&M shifter with reverse shift pattern plate
- Dana 20 Transfer Case with Twin Stick
- Wild Horses 4X4 Extreme Dana 20 output shaft system
- Front and Rear Extreme Duty Long Travel Drive Shafts
- Dana 44 Front Diff with 5.13 gears and a Detroit Tru Trac
- 4340 Chrome Moly Axles
- Super Joint axle joints
- CTM U-Joints
- Front Disc Brakes with Drill Rotors
- Warn Premium Locking Hubs
- Chrome Moly Tie Rods and Drag Link with Heavy Duty Rod Ends
- Ram Assisted Power Steering with External Fluid Cooler
- 5.5” Lift Wild Horses Front Coils
- Fox 14” Travel Shocks with reservoirs and custom shock hoops
- Power Brakes
- The Air Conditioner Pump is converted to an Air Compressor with pressure cut off
- Heavy Duty 9” Housing with gussets
- 5.13 gears and a Detroit Locker
- Billet Steel 1350 yoke
- Yoke guard
- 31 Spline Superior Axles
- 5.5” Lift Deaver Leaf Springs with Wild Horses Extreme Leaf Plates and U Bolts
- 12” Travel Fox Shocks with reservoirs
- Extreme travel traction bars
- 1.5" Aluminum Wheel Spacers at all four wheels (gives the Bronco a wider wheel base)
- The Frame is Powder Coated
- The Tub has a Roll On bed liner applied to the bottom
- The outside and inside are sprayed with Red Vortex Bed Liner (Absolutely Rust Free)
- Protofab Front Plate Style Bumper powder coated black
- H4 Headlights
- Plate Style Rear Bumper with Tire and Cooler Swing Outs
- Custom Made Low Profile Rock Sliders with Nerf bars in place of the stock rockers
- Gorilla Warflares (the wheel openings were widend roughly 3")
- Rear Storage Tool Box
- Six Point Family Cage that is tied to the frame in four spots and powder coated black. (Cage will fit under a soft top. Top not included.)
-Hi-lift jack mount
- Aluminum roof
- Stainless Steel Dash
- Auto Meter Gauges
- Grant Steering Wheel
- B&M Shifter
- Tuffy Security Console
- C.D. player
- 280 watt amplifier
- 4 Sony Speakers (2 6” round and 2 6x9)
- Beard Suspension Seats up front
- PRP Suspension Bench Seat with 4 point Harnesses in Rear
- C.B.
- 2 Stainless Steel Off Road Lights
- 6 Rock Lights
- 38 X 12.50 X 15 Super Swamper TSL SX tires (spare is brand new, never been rolled on)
- 15 x 10 Weld “Out Back” style aluminum wheels
- 24 Gallon B.C. Broncos Gas Tank
- Warn 9500ti Winch
That’s all I can think of right now. It should get you started.
Located in Amarillo, Texas. PM me for email or phone number
Asking $16,500.00
![web1.jpg](http://i962.photobucket.com/albums/ae106/FaTKiLL/web1.jpg)
![web2.jpg](http://i962.photobucket.com/albums/ae106/FaTKiLL/web2.jpg)
![web3.jpg](http://i962.photobucket.com/albums/ae106/FaTKiLL/web3.jpg)
![web4.jpg](http://i962.photobucket.com/albums/ae106/FaTKiLL/web4.jpg)
![web5.jpg](http://i962.photobucket.com/albums/ae106/FaTKiLL/web5.jpg)