City:
Raleigh, MS
Price: $ 15000
Price: $ 15000
I am selling my 1973 Bronco Sport. I purchased this in 2024 with the intent of making it a weekend driver, but family and work responsibilities have slowed me down. The Bronco has a clean title in my name. Attached is a google drive link that contains more pictures. Please message with any questions or to discuss further. I am asking $15,000.
https://drive.google.com/drive/folders/1PQ9Ko2DwgY0vGLwpD2jZaAX2O3E01NUu
What has been done and purchased:
I replaced the body mounts with standard height bushings and have started rebuilding the suspension with the James Duff 2.5” lift kit. I have the rear done, but the front shocks, spring, and caster bushings are ready to be installed. I rebuilt the rear drum brakes with a kit from Wild Horses. I have new hard and soft lines still in their packages. I had the dash powder coated in a tan color and the speedometer rebuilt by Classy Gauges. A new Painless wiring harness was purchased from Wild Horses, but I have only gotten as far as wiring the dash while it’s out of the truck. The heater box has a new heater core installed. All new dash switches were purchased from Wild Horses as well. The brace under the battery tray is rusted at the body mount and a new one was purchased, but hasn’t been installed. I have a rebuilt, correct for ‘73, auto steering column and steering wheel that’s included.
Drivetrain:
When I purchased the Bronco, it only had a non-running 302 installed. I put it on an engine stand, and that’s where it currently sits. I‘m not sure if it’s original to the Bronco, but it should be rebuildable. I purchased the rebuilt C4 and Dana 20 transfer case combo that Kurt Streck advertises on Facebook. It was never installed and is sitting on it‘s shipping pallet. There are no driveshafts included. The primary fuel tank is included.
Body:
The Bronco does have typical floor rust, but it isn’t as bad as some that I’ve had in the past or seen. The frame has no rot, only surface rust. The driver side, front fender has a bend in it. The passenger door is bent up as well as the rocker panel. Whatever caused this damage also tweaked the rear quarter panel as it is kicked out a bit; you can see this when standing at the rear of the truck, looking down the side of it. The tailgate and rear tire swing out is included.
https://drive.google.com/drive/folders/1PQ9Ko2DwgY0vGLwpD2jZaAX2O3E01NUu
What has been done and purchased:
I replaced the body mounts with standard height bushings and have started rebuilding the suspension with the James Duff 2.5” lift kit. I have the rear done, but the front shocks, spring, and caster bushings are ready to be installed. I rebuilt the rear drum brakes with a kit from Wild Horses. I have new hard and soft lines still in their packages. I had the dash powder coated in a tan color and the speedometer rebuilt by Classy Gauges. A new Painless wiring harness was purchased from Wild Horses, but I have only gotten as far as wiring the dash while it’s out of the truck. The heater box has a new heater core installed. All new dash switches were purchased from Wild Horses as well. The brace under the battery tray is rusted at the body mount and a new one was purchased, but hasn’t been installed. I have a rebuilt, correct for ‘73, auto steering column and steering wheel that’s included.
Drivetrain:
When I purchased the Bronco, it only had a non-running 302 installed. I put it on an engine stand, and that’s where it currently sits. I‘m not sure if it’s original to the Bronco, but it should be rebuildable. I purchased the rebuilt C4 and Dana 20 transfer case combo that Kurt Streck advertises on Facebook. It was never installed and is sitting on it‘s shipping pallet. There are no driveshafts included. The primary fuel tank is included.
Body:
The Bronco does have typical floor rust, but it isn’t as bad as some that I’ve had in the past or seen. The frame has no rot, only surface rust. The driver side, front fender has a bend in it. The passenger door is bent up as well as the rocker panel. Whatever caused this damage also tweaked the rear quarter panel as it is kicked out a bit; you can see this when standing at the rear of the truck, looking down the side of it. The tailgate and rear tire swing out is included.











