1974 bronco complete project

[805tony]

1974 Early Bronco (complete project) $12,000 obo

-Charcoal Grey

-Frame and undercarriage cleaned &stripped then sprayed with Zero Rust

-(NEW) James Duff - 5.5" Monster Suspension
5.5" Progressive Rate Coils, 7° 14 piece Bushing Kit, 11 Leaf Springs, Stage 3 Radius Arms, HD Track Bar Drop Bracket, U-bolts, Stage 2 Shock Hoops, Stage 2 Rear Shock Mounts, 4-8120 Long Travel Shocks, 4-8114 Shocks, Shackle Bushings. With 2 inch body lift. Inc Adjustable trac bar.

-Completely (All New Internals) rebuild Dana 44 front end. Wild Horses ChroMo axles w/Spicer 297 joints, Wild Horses Super Deluxe Front disc brake Kit, Dana 44 4.10 Ring & Pinion, with Detroit Soft Locker.

-(NEW) Currie Heavy duty 9 inch rear end with Wild Horses heavy duty 31 spline axles and Rear disc brake kit.

(New) complete Keith Craft EFI 408 stroker motor. Isky cam, AFR heads-(have all internal specs on motor) EFI kit is from Mass flow EFI. & Wild Horses Heavy duty Motor mounts

(New) Performance Automatic AOD transmission with Torque Converter & fly wheel matched to HP & torque of motor.

-(New) Advanced Adapter AOD to Dana 20 T transfer case.

-Rebuilt Dana 20 T style transfer case.

New James Duff EFI 23 gallon Gas tank.

New Pro Flo fiberglass cowl hood with Wild Horses Stainless Hood Shocks with brackets and hardware.

-New Wild Horses Gorilla Warflares Front & Rear

-Ford 150 p/s box and adapter.

Original Dash, Knobs, Spedo cluster, lights, steering column, and other misc parts.

Email or Call

805tony@gmail.com

805-570-6634

 

[mgb0302]

bronco

are these pics current or has it been completed? if completed, send pics to saraandmike@yahoo.com.

mike

 

[smoktf250]

Do you have any pictures of the engine? Or mass flo efi? I would be interested in some of your parts if you decided to let go of them separatly...hood, hood shocks, and possibly mass flo efi.
Cal

 

[805tony]

are these pics current or has it been completed? if completed, send pics to saraandmike@yahoo.com.

mike

Yes they are current pics. The reason why Im selling the Bronco is because
Im going separate ways from my business partner at our garage, and I don't have anywhere or time to finish it.

 

[805tony]

Do you have any pictures of the engine? Or mass flo efi? I would be interested in some of your parts if you decided to let go of them separatly...hood, hood shocks, and possibly mass flo efi.
Cal

Here you go! The ignition system and fuel pump are inc.

 

[805tony]

I forgot to add that the 9 inch is assembled with 4.11 and detroit locker.

 

[smoktf250]

Where are you located? Would you be interested in parting few items out?

 

[805tony]

What are you interested in?

 

[smoktf250]

Sent you a pm on parts

 

[805tony]

Here's some new pics for those of you who inquired about it.

 

[KuttySark]

If you don't mind me asking, who makes your post lift and are you happy with it?

Bump for ya.

 

[Rob1962]

I like those wheels.

You're so close to being done, can't you finishg and then sell?

If it were done, I'd possibly be interested. Like the setup, and the engine, its going to be a stud.

 

[popi411]

interested in selling just the rims and tires? how much? mdomingue@miswaco.com or 337.962>1251

 

[scotts77]

If I was looking to built one I would be all over this. Lots of nice stuff.

 

[Hurk]

What size tires and wheels?

 

[805tony]

For those of you who wanted to know why I was selling the Bronco. Its because my business partner and I are going our separate ways. I couldn't find a place to work on it for a reasonable price! So he needed it out by the end of the month. So as of now I found a garage to finish up the bronco. After reviewing the amount of money "25k" I have invested into this. 12k is not worth it. It would be stupid not to finish it. I am going to finish up the project at a friends garage. Thanks for everyones inquiries.

 

[Stan J]

Just discovering this site. Any chance its still available?