• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

2 in 2 out muffler system

fordguy

Contributor
Bronco Guru
Joined
Jan 23, 2005
Messages
6,362
Plan is/was to run the above down passenger rail side with turn downs past the axle with a sonic turbo type muffler, will include a x pipe. Stock explorer engine with Efi. Any reason to not run it other than cost?
 

Rightpace

Jr. Member
Joined
Aug 26, 2019
Messages
114
I've read a lot of posts about exhaust fumes being drawn back into the cab when tail pipe doesn't exit out behind back tire area.
 

JWMcCrary

Contributor
Bronco Guru
Joined
Oct 14, 2004
Messages
5,001
I have a 2 in and 2 out magnaflo on both of mine, both dump under the body right behind the axle. Never had a problem with fumes but I don't have a top or doors. I did this on my 73 when I went to fuel injection to keep the exhaust away from the drivers side frame rail. I like enough that I did the same thing to the other one.
 
OP
OP
fordguy

fordguy

Contributor
Bronco Guru
Joined
Jan 23, 2005
Messages
6,362
I have a 2 in and 2 out magnaflo on both of mine, both dump under the body right behind the axle. Never had a problem with fumes but I don't have a top or doors. I did this on my 73 when I went to fuel injection to keep the exhaust away from the drivers side frame rail. I like enough that I did the same thing to the other one.

My thoughts on frame rail. It will be an easy fix if i have fumes. Seems the worst location is out the back by the tail gate. Seventee, thanks for the tip, will save some dollars because i bought the wrong diameter x-pipe.
 

theshadow

Sr. Member
Joined
Jun 30, 2006
Messages
369
I've read a lot of posts about exhaust fumes being drawn back into the cab when tail pipe doesn't exit out behind back tire area.
I have dual 90s before the tires and exhaust fumes all day. Looks cool, but literally sucks.

Will be reworking the exhaust as part of my current rebuild.

Sent from my Pixel 3 using Tapatalk
 

MikeCon

Full Member
Joined
Apr 7, 2019
Messages
276
Why not just run pipes out back like stock..Keeps fumes and noise out of truck.
 

Scoop

Contributor
Bronco Old Fart
Joined
Feb 1, 2006
Messages
11,122
Loc.
Cuchara, CO
No reason to do an X-pipe if you're using a 2 in 2 out muffler.

That was my first thought too. But then I saw the new exhaust on the new 2021 Raptor 37 V6 EcoBoost. They run equal length pipes from the headers (one side has a 360 degree loop to make them equal!) into a 2-in, 2-out muffler and then an x-pipe past the muffler and then dual tips straight out the back. It's an interesting setup. I think the purpose of the x-pipe is it somehow deepens the tone of the V6 to make sound more like a V8. I can't see how the x-pipe downstream of the single muffler could help scavenge which is what an x-pipe is for??
 
OP
OP
fordguy

fordguy

Contributor
Bronco Guru
Joined
Jan 23, 2005
Messages
6,362
That was my first thought too. But then I saw the new exhaust on the new 2021 Raptor 37 V6 EcoBoost. They run equal length pipes from the headers (one side has a 360 degree loop to make them equal!) into a 2-in, 2-out muffler and then an x-pipe past the muffler and then dual tips straight out the back. It's an interesting setup. I think the purpose of the x-pipe is it somehow deepens the tone of the V6 to make sound more like a V8. I can't see how the x-pipe downstream of the single muffler could help scavenge which is what an x-pipe is for??

What about upstream for same setup
 

68ford

Bronco Guru
Joined
Dec 26, 2004
Messages
2,710
My buddy has an X pipe followed by a 2inlet single large out muffler dumped just past the axle as you described.
It sounds very good. He runs a 50 series flowmaster.
 

Seventee

Contributor
Sr. Member
Joined
Dec 7, 2012
Messages
999
Loc.
In the sticks of MT
That was my first thought too. But then I saw the new exhaust on the new 2021 Raptor 37 V6 EcoBoost. They run equal length pipes from the headers (one side has a 360 degree loop to make them equal!) into a 2-in, 2-out muffler and then an x-pipe past the muffler and then dual tips straight out the back. It's an interesting setup. I think the purpose of the x-pipe is it somehow deepens the tone of the V6 to make sound more like a V8. I can't see how the x-pipe downstream of the single muffler could help scavenge which is what an x-pipe is for??

No doubt it would change the tone, so that might be a good thing if you have the space for it. I read that Ford went to great lengths on the '21 to tune the exhaust to make it more palatable to enthusiasts who didn't like the raw V-6 sound.

But the balancing effect of an X or H pipe is already achieved at the muffler, unless the muffler passages are somehow isolated internally, which maybe they are in some cases. The Flowmaster and Walker mufflers I've used were not isolated.
 
OP
OP
fordguy

fordguy

Contributor
Bronco Guru
Joined
Jan 23, 2005
Messages
6,362
Seventee, i think i have room for the small x pipe i have.
 

Bitch'nBronco

Contributor
Loose Cannon
Joined
Dec 1, 2005
Messages
3,620
Loc.
Ringwood, NJ
My exhaust is almost exactly what you're describing (I think), fumes aren't bad but more noticeable than they are going out like stock. I'll probably reroute them to the side in the future
0d81be1cfeca877076f8a5de89d62d6b.jpg


Sent from my SM-G981V using Tapatalk
 
Top