• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

3 spd clutch install

ZookBronc

Sr. Member
Joined
Apr 25, 2005
Messages
924
Loc.
South Orange County
What does it take to install a new clutch? From what I have read here I am going to put in a Centerforce dual friction. I have yet to work on any or the drivetrain really so i am not that familiar with it but i know i can do it, I just needs some pointers.
 

FSRBIKER

Sr. Member
Joined
Apr 10, 2002
Messages
943
Loc.
Oak Ridge, NJ
Basic hand tools and a tranny adapter for your floor jack makes the job MUCH easier. Not really hard at all.

ZookBronc said:
What does it take to install a new clutch? From what I have read here I am going to put in a Centerforce dual friction. I have yet to work on any or the drivetrain really so i am not that familiar with it but i know i can do it, I just needs some pointers.
 

FSRBIKER

Sr. Member
Joined
Apr 10, 2002
Messages
943
Loc.
Oak Ridge, NJ
Unbolt the driveshafts/crossmember/bellhousing/linkage/shifters and just make sure you have clearance with your exhaust. You should have your flywheel resurfaced as well, not expensive and it will prevent any clutch chatter. It's pretty straightforward, get yourself a clutch alignment tool(under $10) if it doesn't come with your clutch kit which makes lining it up a breeze.

It's easier with a helper but can be done by yourself.
 
Top