• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

300 big six is in

66broncoluvr

Sr. Member
Joined
Aug 16, 2005
Messages
435
Loc.
St. louis, MO
itema

i used a radiator that came out of the 78 f250 with the motor! also used the motor mounts... this was actually just a mock up motor, but once i got it in i just decided to try and she fired right up! the motor will fit into the frame horns of a 200 or 170... u just have to grind the holes for the bolts upward making the hole look like a diamond! go about as far up as the hole goes down ( if that makes sense , i will post pics when i can) good luck
 

eveready77

Jr. Member
Joined
Nov 3, 2005
Messages
96
Loc.
Chattanooga
This swap has me very interested. The 200 has done very well for me on the trail, its just getting there that has me thinking of bumping up to a 300. I would like to have enough power to pull a 5speed and be able to use OD. Could you tell me a little more about how it drives out on the road or interstate? How does the power feel, I'm assumeing its night and day diffrent from the 170 or 200.
 

JC

Full Member
Joined
Mar 1, 2007
Messages
253
Loc.
Conway, Arkansas
Thanks for the info 66Broncoluvr!

This swap has me very interested. The 200 has done very well for me on the trail, its just getting there that has me thinking of bumping up to a 300. .
Same here!!

I would like to have enough power to pull a 5speed and be able to use OD. Could you tell me a little more about how it drives out on the road or interstate? How does the power feel, I'm assumeing its night and day diffrent from the 170 or 200.
I've had two different trucks with 300's and 5spd and I personally think its a great combo. Never wanted for anything more. I'm betting it would make a night and day difference.
 

Revelation

Bronco Guru
Joined
Oct 9, 2004
Messages
4,825
Happy to see someone else decided to go outside the norm. As he stated, front crossmember has to be delt with and the other things as stated if you are going in the stock location. Not a mod for the faint of heart.

I should be sitting my body on in a few weeks and will see if I will have any further issues. I lowered the motor and trans 3" and also moved them back 3" making some mods to the firewall to accommodate the move backwards but the body lift will not be needed.
 

Carcowboy

New Member
Joined
Mar 24, 2011
Messages
1
Sweet I'm doing a 170 to 300 swap got it all worked out and looking forward to starting it after may 24 weekend, how did the rear of the intake clear
 

Pa PITT

Contributor
Bronco Guru
Joined
Jul 15, 2005
Messages
11,300
Loc.
Stephenville TEXAS
Well it's funny to see old post of mine. About the time I post in this one I was wondering if My 4BT would ever get done. But one it started it went fast. Now it's been running for a year with no trouble . I believe my 4BT might be easier to install than the 300 But then who knows.
... I need a carb to get my old 1980 300 going again.
 
Top