300M Dana 20 Output Shaft Mass Buy

[zir33]

> Subject: 300M Dana 20 Output Shaft Mass Buy
>
>
> Here's the deal:
>
> B.C. Broncos 300M Dana 20 Output Shaft
> Regular price: $400
> Mass buy price with 30 shafts: $300 + shipping
> Price is check or money order. Chuck has got the price down so
> low there is nothing in it for him so with credit card or paypal, the
> price would have to cover credit card fees which would be 3% or $9
> more
>
>
> If you are interested, please send me an e-mail directly, zir33@yahoo.com, and I will
> get
> a list together. Let me know if you are in no matter what or you are
> a maybe and may be able to make a different
> descision in a month. I am hoping we will have until the end of
> march
> to get everyone in.
>
> Here is a description:
>
> The new Dana 20 output shaft is made for B.C. Broncos by one of the
> best gear manufactures in the U.S. The shafts are being made to very
> close specs to match the stock Dana 20 output shafts in every way
> except strength. The 300M material is much stronger so the shafts can
> be made to stock specs, it is the same material that the CTM U joints
> are made of. The company that makes this shaft also makes
> crankshafts
> and axles for some of the top fuel dragsters. Remember that this is a
> direct
> replacement for the stock shaft (no driveline changes)and is
> guaranteed for life!
>
> Some tech info. from the manufacture,
>
> Thread: J-series controlled radius root for improved strength .
>
> Inside corners: Generous blend radii avoids stress concentration
> .Splines: Precision hobbed for improved mating part fit and
> alignments.
>
>
> Bearing Journals: Ground to precise size for correct fit, surface
> finish and concentricity.
>
> Material: Uniquely alloyed and tempered, vacuum melted, 300M steel
> produced specifically for highly stressed, torsion applications.
>
>
>
>
> LIFE TIME WARRANTY!
>
> Get in on the BEST MASS BUY this year!
>


=====
Jasen Moore In his heart a man plans his course,
Yakima, Washington but the Lord determines his steps.
zir33@yahoo.com Prov. 16:9
71, 351W w/q-jet, np435, ps, pb, Dana 44 w/ Lock-right, 9" w/detroit,
36x12.5x15 TSL SX, 3 1/2" suspension, 2" body, wristed arm
http://www.geocities.com/Yosemite/Forest/1137/

 

[BRONKEN]

HOW MANY TAKERS DO YOU HAVE SO FAR & WHEN IS THE DEADLINE?

 

[BRONKEN]

Anyone ???

 

[Broncobowsher]

Sounds interesting, but like you mentioned, there are a few importent details missing. Waiting to hear what the missing details will be.

Will this be directly through BC or some other 3rd party?

 

[Madgyver]

Is this buy happenning?

 

[ctowery]

I hope so, I e-mailed to get on list.

Cary

 

[zir33]

This buy is going to happen, but we need to get 30 people. We are at 14 that are "interested" and 5 that are "maybe". I will be giving everyone updates as I have more information to give.

If there are people that are not on the lists, let them know. This will be the lowest price they are going to get.

E-mail me direct, zir33@yahoo.com if you have any questions.

 

[zir33]

Current list:

Interested
"Jasen Moore" <zir33@yahoo.com>,
"Brian Cooke" <nvrstuk@elltel.net>,
"Adam Harris" <asharris@quixnet.net>,
"Jack Covert" <ironbenderii@yahoo.com>,
"Taad Janson" <t.janson@att.net>,
"passauf" <passauf@pacbell.net>,
"Matt Strunk",
"Anthony Harris" <awharris@access4less.net>,
"Andy Lewis" <a5lewis@yahoo.com>,
"jerry hoffmeister" <hoffy@sopris.net>,
"Nicholas J Rapp" <nrapp@firstfinancial.org>,
"Quinn Dusenberry" <q.dusenberry@comcast.net>,
"cary towery" <caryt@lycos.com>,
"Pat" <kelpy@sbcglobal.net>,


Maybe
"Steve Weddell" <broncosteve@comcast.net>,
"Allen Fahey" <allenfahey@comcast.net>,
"Keith" <warlock@zianet.com>,
"BRONKEN",
"Doc Lewis" <rblewis@aeneas.net>",
"madgyver"

 

[zir33]

> For those that might have missed the earlier posts we are well over
> half way towards the 30 output shafts we need for the MASS BUY.
>
>
> and check out the specs for a direct replacement for the weak link in
> your drivetrain-- the Dana 20 output shaft.
>
> The discount for the mass buy is over $100.00 retail is $400 and
> the mass buy price is $300.
>
> Email me, or Brian, direct for more info
> "Jasen Moore" <zir33@yahoo.com>
> "Brian Cooke" <nvrstuk@elltel.net>

 

[zir33]

getting towards the end

We are very close to having the required 30. I think it is time to
start getting everyone's information, so I can send it to Chuck.
Please send me your name, address, city, state, zip and phone number.
Also, please include how you intend on paying (check or CC).

We only need a couple more, so if you are interested in getting in on
this mass buy, please contact me so I can add you to the list before
the order is sent.

I would like to order on April 2nd, but that may be postponed until the
9th if we do not have enough.

If you need more information, go to one of the following -

http://www.broncofix.com/board/viewtopic.php?t=3702
http://www.classicbroncos.com/forums/showthread.php?s=&threadid=42774

This will be one of the best buys of the year, don't miss out.

 

[zir33]

THis thing is ending!!!!!!!!!!!!

Woo Hoo! This mass buy is ending!!!

We have enough people to process the order. If you want to be included in this mass buy, please contact me by Thursday, April 15. This thing will be over Friday.


If you are already in on this mass buy, I will be e-mailing you shortly to give you further information.

Don't miss out on a great opportunity.

Jasen
zir33@yahoo.com

 

[Slick]

;D

Just get an NP205 for $100 and everything is strong!

 

[roksmurf]

sent ya a pm

 

[zir33]

We will individually be sending payment to Chuck directly. Everyone will need to have there payment in by Friday, if possible. If not, I atleast need to have an e-mail from everyone saying they are in and that their payment is on its way. Chuck will not order until the required number of payments are in.

 

[zir33]

Should be shipping 1st week of August

I spoke with Chuck yesterday and he said that the manufacturer shipped them to him on July 21st. They should be getting them in and boxed up this week and shipped by next week.

 

[TonyPDX]

Warning Output shaft may not fit.

Warning I tried to install my new output shaft and it will not fit into the main gear. I spoke with Chuck, he checked the ones he had in stock and found they would not fit some gears either. He was very nice and said to ship it back and he would call the manufacturer on Monday to figure out a solution.

Has anyone else had this issue?

Regards, Tony

 

[chuck]

As Tony typed, some and maybe all of the shafts we shipped may not fit. Plase check yours and return it ASAP if it will not fit. To test simply stick the big end of the shaft into the gear inside the T-case. If it goes in it's good, if it will not slip in return it. Sorry for any inconvenience. I did not think to try them as the last batch worked fine.

 

[crawln68]

Hey Chuck, I just found this thread today about this mas buy. Do you have any left at this price? :-[ I'm always a day late and a dollar short.

 

[crawln68]

Just your friendly bump.

 

[crawln68]

Was the "not fitting" problem with these corrected? %) If so, how is the performance once installed?