• Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

302/5.0 Explorer Serp, Saginaw, AC bracket???

xcntrk

Bronco Guru
Joined
Jan 12, 2012
Messages
2,473
Loc.
NOVA
Any thoughts on how best to add AC to my existing setup?

I have a 302/5.0 block with Explorer front dress. The driver side explorer bracket is replaced with a WH conversion kit for Saginaw PS pump. Any thoughts on how to retain the Saginaw but add in provisions for an AC pump? I know I can return to the OE Explorer driver side bracket which contains an AC bracket, but I will lose the Saginaw pump. I know there's a thread on here about a custom 351 serp bracket that allows this; but anybody seen such a thing for the 302?

Thanks!
 

englewoodcowboy

Lick Creek Restorations
Joined
Jul 25, 2010
Messages
4,200
You can do what I did, convert it back to the explorer pump and replace the guts of the explorer pump with this out of a 06 super duty 6.0 pump, guts are a direct swap. Larger volume pump and higher pressure etc then add the explorer AC pump back on.
 
Top