33x10.50r15 - What Lift on Uncut?

[Casey4wd]

I have tried searching around and have not come up with a conclusion. I am interested in running BFG 33x10.50r15 and curious what lift is appropriate? I currently have a 1" body lift from WH and debating on the 2.5" or the 3.5" WH suspension lift. My Bronco is uncut and is going to remain that way. Anyone running this set-up that can post a picture would be greatly appreciated.

 

[DeezNCSU]

I have 33x12.50s on 15x10 wheels and have a 1" body lift and 2.5" suspension lift and love the setup, it has a great stance. Sorry, not sure why the pic is sideways.

 

[rguest3]

The 2 1/2" with body lift will be better I think.

Depends on wheels too. Stock wheels?

 

[Casey4wd]

Wheels are 15x7s - not sure on the back spacing.

 

[Krawlin5]

I'm running 33x10.5x15 on factory ford f-150 wheels. I running 2in body lift and 2 in suspension with rear axle back 1 in and tires still rub.

 

[doghows72]

I'm running a 1"BL and a 2 1/2SL. My rims are 17" with 265x70x17 which is about a 32x10x17. I could easily get a 33x10.5 under there. My wheels are a 4" BS

 

[Casey4wd]

Doghows72 - do your current tires rub in the back at all? Do you think 33" tires would rub?

Anyone else with 33x10.50 tires willing to post a picture???

 

[ford man]

Had a friend that ran 33/12.50/15 on 7" wheels 5.5" SL no body lift never rubbed front or rear and he wheeled it hard uncut.

 

[skinner]

saw this one on a face book post.. build a bronco had.. said it was 33x10.50.. swamper does make a radial that looks real close to this tire.. either way i love the stance of this bronco.. the black and white photo looks best to me...

 

[doghows72]

I do not rub anywhere. Front or rear. Full turn no rubbing. I could easily go 33x10.5 with this lift and wheel combo.
I am running the exact suspension you are looking at. 2.5 WH

 

[Casey4wd]

Thank you! Sounds like 2.5" WH lift will do the trick... although I am still tempted to do the 3.5" lift for the extra clearance.

The turquoise bronco looks awesome. That is the stance I am looking for.

 

[Casey4wd]

Any idea what the suspension/body lift/tires are on this Bronco?

 

[ncsubronc]

I ran 33x10.50 BFG on stock wheels with a 3.5" lift. No rubbing The green one above looks like 31x10.50 to me. Just a guess though.

 

[skinner]

It's listed in the lubr thread I think. Look here. Tons of great lifted uncut Broncos.

http://classicbroncos.com/forums/showthread.php?t=178183&highlight=Lubr

 

[BoureeOne]

Any idea what the suspension/body lift/tires are on this Bronco?

This is what he said it had.......

3.5" suspension lift and 1" body lift with 31x10.5's on stock rims

 

[Casey4wd]

ncsubronc - I really like the stance of your Bronco. I would imagine that a 1" body lift and 2.5" suspension would be pretty similar to your 3.5" suspension (or at least the math is the same!)

 

[Casey4wd]

I could spend hours in the LUBER thread. Thanks for tracking that one down for me.

 

[Mustangs2]

Hey Casey check out "Nick's Trix" website. You can just google it.
He has two (2) LUBR's with 33x10.50x15 tires.

I went with 31x10.50x15 tires on stock rims. I have a 2.5" S.L. and 1" B.L.
I love the look and I am very glad I did the 1" B.L. and not just a S.L.
The B.L. is great for getting access when lying under it and helps fit the 351W under the hood.

 

[ncsubronc]

ncsubronc - I really like the stance of your Bronco. I would imagine that a 1" body lift and 2.5" suspension would be pretty similar to your 3.5" suspension (or at least the math is the same!)

Thanks Casey! Yea I would imagine that would work out to about the same using the body lift and suspension.

 

[rguest3]

Wheel Backspacing will determine tire rub for you.

Stock steel wheel and 7" wheel with 4" BS will work.