351w timing cover with serp setup

[Arniep]

Found out that early 351 timing cover isn't compatible with reverse rotation WP needed for a serpentine setup (different shaped water ports). No problem changing the cover except that late model type doesn't have a fuel pump hole. Is there a cover that accommodates a reverse rotation WP and has fuel pump mount? If not, it's looking like an electric pump may be in my future!

 

[rguest3]

87-93 Mustang Timing Cover has the mechanical fuel pump Boss.

Use the F-series/Bronco 94-97 serpentine system (F4TA on Brackets) with that water pump as well.

Champion Aluminum Radiator, 1 1/2" Spacer and 17" Mechanical Fan with stock Fan Shroud..

Everything fits with only minor trimming/grinding on back side of PS Bracket (it's aluminum, not bad at all) to clear mechanical pump and maybe some trimming on Fan Shroud.

This whole set-up works with 302/5.0L and 351w.

You can also get the set-up from a 87-93 Mustang but replace the PS Bracket with the F-series/Bronco one. everything will line up perfect. About a 90" Fan Belt with AC or AC Delete.

Easiest to install and cleanest looking setup - IMO

 

[Ourobos]

Not all 87-93 had it. An 85 Mustang GT does have it for sure, the last year of the carb'd Windsor (302, but 351w uses same cover) that also had reverse rotation pump. I may have one in the shop if you're looking for used. PM me and I'll check.

 

[Arniep]

I've got a 302HO in my accumilated junk. The timing cover doesn't have the fuel pump mount, but the water pump will mount on my F150 cover. I'm using the F150 power steering bracket (modified),pump and the mustang alternator and bracket,eliminating the air pump. the belt is 82.5 inches. That said, I'll put the water pump on in the morning, then move on to the next problem. Thanks for your replies, Arnie