• Be EXTREMELY cautious if someone offers to buy your Bronco for more than your asking price and sight unseen. ESPECIALLY if the buyer is overseas. It's probably a scam.

    Discuss it more here:
    http://classicbroncos.com/forums/showthread.php?p=514932
  • The Classifieds forum is a place to buy and sell, not an open forum for people to give their opinions on Bronco values. Unless the seller specifically asks for help on pricing, please don't critique quality or asking price. If you're not interested then move on.

    Thanks!
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

SOLD 4R70W with adapter and controller

Status
Not open for further replies.

JGO

Contributor
Sr. Member
Joined
May 22, 2013
Messages
783
Fresh $900 rebuild with Baumann valve body kit, and new controller and mechanical TPS kit. Dana 20 adapter installed and included.
 

Attachments

  • IMG_2933.jpg
    IMG_2933.jpg
    117.6 KB · Views: 178
  • IMG_2932.jpg
    IMG_2932.jpg
    130.4 KB · Views: 193
  • IMG_2931.jpg
    IMG_2931.jpg
    93.5 KB · Views: 165
  • IMG_9792.jpg
    IMG_9792.jpg
    165.8 KB · Views: 167
  • IMG_9790.jpg
    IMG_9790.jpg
    127 KB · Views: 164
  • IMG_9793.jpg
    IMG_9793.jpg
    108.1 KB · Views: 145
OP
OP
J

JGO

Contributor
Sr. Member
Joined
May 22, 2013
Messages
783

Attachments

  • IMG_9784.jpg
    IMG_9784.jpg
    152 KB · Views: 163
  • IMG_9785.jpg
    IMG_9785.jpg
    122.8 KB · Views: 152

SteveL

Huge chevy guy
Joined
Jun 24, 2001
Messages
11,969
Loc.
Hawthorne ca
The controller is for a carbed motor? What about driveshaft lengths? Mine set withstock drivetrain length and a 3" lift.
 
OP
OP
J

JGO

Contributor
Sr. Member
Joined
May 22, 2013
Messages
783
The controller is for a carbed motor? What about driveshaft lengths? Mine set withstock drivetrain length and a 3" lift.

You might be ok on the rear driveshaft, but should plan on a re-tube or two. The controller needs a TPS signal usually only on fuel injected motors but this comes with a carb TPS kit so can be either.
 
OP
OP
J

JGO

Contributor
Sr. Member
Joined
May 22, 2013
Messages
783
What’s your installed price? Local- c4 installed currently.

I could install it in exchange for the C4 coming out or $500. This would consist of just installing it and modifying your crossmember, you would have to wire controller and fit driveshafts and cooler on your own. I don't have space or time for long term projects. I do have a trailer to help move it.

Jim
 
Status
Not open for further replies.
Top