66 fender differences

[tortoiseracer]

So my 66 has aftermarket fenders. I have someone who has some 66 factory fenders but would like to know if anyone has a picture or good description of how to verify factory 66 fenders. Thanks again for the help I have been getting from this group.
Chris

 

[okie4570]

Aftermarket as in they're cut and have flares, or they're not cut and you're not sure if they're original?

 

[tortoiseracer]

The current fenders are aftermarket not cut. The ones I am looking at are supposed to be oem also uncut for a 66

 

[camp9k]

I think the 66 fenders have one less hole for the emblems...the bottom of the b I think...I have a set in the attic and will have my son take a pic when he gets home. Also no turn cut out of course. pretty sure there four pin bronco emblems in 66 so five holes would be 67 and later..

Thanks
John

 

[clarrance]

I think the 66 fenders have one less hole for the emblems...the bottom of the b I think...I have a set in the attic and will have my son take a pic when he gets home. Also no turn cut out of course. pretty sure there four pin bronco emblems in 66 so five holes would be 67 and later..

Thanks
John

Also the bolt pattern at the bottom brace area by the door post is different

 

[tortoiseracer]

Can you identify the difference in the bolt pattern at the bottom brace area by the door post in a way I could tell by a picture.
Thanks

 

[camp9k]

the fenders are tucked away tight but he was able to get a pic of the back side....only 4 holes.