• Just a reminder that you won't be able to start new posts or reply to existings posts in the Archive forum.

    This is where all the old posts go so they can still be used for reference and searched.
  • Welcome to ClassicBroncos! - You are currently viewing the forums as a GUEST. To take advantage of all the site features, please take a moment to register. It's fast, simple and absolutely free. So please join our community today!
    If you have problems registering or can't log into your account, please contact Admin.

7100 Valving

75Bronc

Sr. Member
Joined
Feb 5, 2008
Messages
425
I'm going to get longer shocks for the front with my new Duff arms. Should I get 360/80 valving like I had before? Or will the long arms benefit from the stiffer 400/100? I'm thinking 400/100 might help reduce any additional body roll with the long arms.

I have bcb 3.5" springs all the way around and Duff arms. 2" body lift. Probably looking to get a winch and bumper in future.

Opinions?
 

toddz69

Sponsor/Vendor
Bronco Guru
Joined
Nov 28, 2001
Messages
11,222
Are you wanting to run one shock or two?

Todd Z.
 

toddz69

Sponsor/Vendor
Bronco Guru
Joined
Nov 28, 2001
Messages
11,222
I've never tried the 400/100 valving but with what I see in your avatar in terms of tire/wheel size and your mention of possibly going to a winch/bumper on the front, I'd give it a shot. I ran 360/80 for years (without a winch) and it worked fine but I wanted a bit more for some of the harder running I do - had 35" tires at the time.

As an aside, I was a little south of Globe on Saturday. Ended up traveling through Dudleyville, Winkelman, Kearny, etc. on the way home from a run I did.

Todd Z.
 

Ol'Blue

Contributor
Bronco Guru
Joined
May 28, 2013
Messages
1,982
If you haven't already talked to the Bilstein Tech folks, these guys have always helped me out.

AFTERMARKET & MOTORSPORTS HEADQUARTERS - WEST
thyssenkrupp Bilstein of America
14102 Stowe Drive
Poway, CA. 92064
1-858-386-5900

Good luck
 
OP
OP
75Bronc

75Bronc

Sr. Member
Joined
Feb 5, 2008
Messages
425
Todd,

What trail were you on? I had some buddies in heeps running charlou Gap trail by Oracle, they said they saw a bronco down there. Maybe you??

Also, what are the specs on your rig?
 

toddz69

Sponsor/Vendor
Bronco Guru
Joined
Nov 28, 2001
Messages
11,222
Todd,

What trail were you on? I had some buddies in heeps running charlou Gap trail by Oracle, they said they saw a bronco down there. Maybe you??

Also, what are the specs on your rig?

It really wasn't much of a trail, per se - all 2WD. A network of dirt roads from Eloy to the Pinal Parkway and then Freeman Road from Pinal Parkway to Dudleyville. I hadn't driven all of Freeman Road in the past so I wanted to follow it from beginning to end. I did Charoleau Gap a number of times in the late '90s but I haven't been on it in at least 15-16 years.

My rig is pretty mild - I have slightly longer arms on the front and had 2.5" Duff coils on it on the trip. Swapped to some 1.5" lift coils Saturday night after I got home :). Will try those for awhile. Tires are metric sized but essentially 34/11.50s. In terms of looks, it's a combination of faded original paint, some patina, and white accents like bumpers, hood, etc. Now running Fox shocks on the front and 7100s out back.

Todd Z.
 

naneumranch

Sr. Member
Joined
Sep 17, 2011
Messages
405
What your valving on the 7100 end the rear ?


Sent from my iPhone using Tapatalk
 
Top