addicted
Bronco Guru
Selling my 73. It has a good running I6 and 3 on the tree. All the sheet metal is original with the exception of the front floor pans and fenders which are the best quality I could find. There is no rust issues. Just light surface rust here and there. Here's the specs.
200 I6 with rebuilt carb, new fuel pump, new Carter electric pump mounted to the frame but not hooked up. New Petronix points conv.
Manual 3 speed trans
Dana 44 and 9" with 4:10 gears. Rebuilt D20 J with JB twin sticks.
Rebuilt front brakes with new wheel bearing and stainless lines
Newly recovered stock seats
New windshield and gasket.
New WH WarFlares
Refurbed rear gas tank and radiator
Stainless lift off door hinges.
Drop wiper bracket with Cherokee wiper conversion.
Im sure Im forgetting some stuff but that's most of it. The Bronco is in good shape. I thought about cleaning it up and throwing a cheap paint job on it but in an effort to be completely honest about its condition Im selling it as it. Im not going to hide any flaws. Its just not how I am. So after asking for a lot of opinions Ive decided to ask for $6000. The Bronco also comes with a good hard top. It could use paint and the pass side glass has a crack but other than that its in good shape.
Now for extra parts.
Disassembled D44 with 4:10 gears , Detroit soft locker, and new chromoly axles and U joints. I had the D44 housing sand blasted but I haven't reassembled it yet. I just hit it with primer.
Rebuilt NP 435 with AA adapted and late model bell housing. I also have the old cast iron bell housing with a new Zoom clutch and flywheel. Also have another NP 435 that is the trans only. It came from a member on here that says its good but I never opened it up or installed it.
Rebuilt 4X4X2 box
WH D20 Heavy Duty output assembly. New in the box. This is the complete assembly with the housing and yoke. Just bolt in and go.
WH riser bracket.
Complete and all new 3.5 suspension lift consisting of BC Bronco 9 leaf packs and coils, JD deluxe shock hoops and rear outboard shock mounts, adj track bar, TBP extended radius arms and brackets, poly bushings, and heavy duty rear shackles.
Cherry OEM tail gate.
F150 disk conversion parts. Knuckes and caliber brackets.
Blasted and painted V8 frame in great condition. All the brackets and mounts have already been removed in preparation for the new suspension. I was planning on building a V8 rolling chassis and then swapping the body over when I was done.
Again, Im probably forgetting stuff, but that's most of it.
I would like to sell everything as a package deal. If you start looking at prices of the parts alone its easily 3-4 thousand in parts alone. So even if you don't need all the parts there is a money making opportunity there for someone. In any case, Im asking $6000 for the Bronco. If someone was interested in a package deal, I'll let EVERYTHING go for $7500 just so I don't have to deal with selling it all off piece by piece. Shoot me a PM if you want more pics or email me at jasonjmorgan@hotmail.com. You can also call me at 337 380-3212. And just so you know, I work offshore and have a two week on, two week off schedule. Supposed to be leaving again next week some time. I'll most likely have wifi but cell service is hit or miss. Thanks for looking. Pics of parts will be sent on request but selling the Bronco first is my main priority and people interested in a package deal get first dibs. I would love for a it to go to a forum member but if I don't sell it here my next move will be Craigslist and Ebay.
200 I6 with rebuilt carb, new fuel pump, new Carter electric pump mounted to the frame but not hooked up. New Petronix points conv.
Manual 3 speed trans
Dana 44 and 9" with 4:10 gears. Rebuilt D20 J with JB twin sticks.
Rebuilt front brakes with new wheel bearing and stainless lines
Newly recovered stock seats
New windshield and gasket.
New WH WarFlares
Refurbed rear gas tank and radiator
Stainless lift off door hinges.
Drop wiper bracket with Cherokee wiper conversion.
Im sure Im forgetting some stuff but that's most of it. The Bronco is in good shape. I thought about cleaning it up and throwing a cheap paint job on it but in an effort to be completely honest about its condition Im selling it as it. Im not going to hide any flaws. Its just not how I am. So after asking for a lot of opinions Ive decided to ask for $6000. The Bronco also comes with a good hard top. It could use paint and the pass side glass has a crack but other than that its in good shape.
Now for extra parts.
Disassembled D44 with 4:10 gears , Detroit soft locker, and new chromoly axles and U joints. I had the D44 housing sand blasted but I haven't reassembled it yet. I just hit it with primer.
Rebuilt NP 435 with AA adapted and late model bell housing. I also have the old cast iron bell housing with a new Zoom clutch and flywheel. Also have another NP 435 that is the trans only. It came from a member on here that says its good but I never opened it up or installed it.
Rebuilt 4X4X2 box
WH D20 Heavy Duty output assembly. New in the box. This is the complete assembly with the housing and yoke. Just bolt in and go.
WH riser bracket.
Complete and all new 3.5 suspension lift consisting of BC Bronco 9 leaf packs and coils, JD deluxe shock hoops and rear outboard shock mounts, adj track bar, TBP extended radius arms and brackets, poly bushings, and heavy duty rear shackles.
Cherry OEM tail gate.
F150 disk conversion parts. Knuckes and caliber brackets.
Blasted and painted V8 frame in great condition. All the brackets and mounts have already been removed in preparation for the new suspension. I was planning on building a V8 rolling chassis and then swapping the body over when I was done.
Again, Im probably forgetting stuff, but that's most of it.
I would like to sell everything as a package deal. If you start looking at prices of the parts alone its easily 3-4 thousand in parts alone. So even if you don't need all the parts there is a money making opportunity there for someone. In any case, Im asking $6000 for the Bronco. If someone was interested in a package deal, I'll let EVERYTHING go for $7500 just so I don't have to deal with selling it all off piece by piece. Shoot me a PM if you want more pics or email me at jasonjmorgan@hotmail.com. You can also call me at 337 380-3212. And just so you know, I work offshore and have a two week on, two week off schedule. Supposed to be leaving again next week some time. I'll most likely have wifi but cell service is hit or miss. Thanks for looking. Pics of parts will be sent on request but selling the Bronco first is my main priority and people interested in a package deal get first dibs. I would love for a it to go to a forum member but if I don't sell it here my next move will be Craigslist and Ebay.
Last edited:
